Toshiba D-VR5SU owner manual Setting the disc / Other System Setup, Protect Disc, Undo Finalize

Page 29

Setting the disc / Other (SYSTEM SETUP)

NOTES:

¥During finalizing, the cursor will move repeatedly. When the finalization finished, ÒFINALISING COM- PLETED PRESS ENTERÓ will appear. Press ENTER to clear the screen.

¥The finalization process may require a few minutes to about 1 hour according to disc type or the amount of free space on the disc.

¥You can record or edit a finalized DVD-RW (in VR mode) by cancelling the finalizing, but you cannot do these operations with a DVD-RW (Video mode), or with a DVD-R.

¥You cannot playback a disc recorded on VR mode on a unit that does not support DVD-RW.

¥Even if you finalize a disc in the Video mode, the disc cannot be played back in some DVD players.

¥A DVD-R disc cannot be named after it is finalized.

PROTECT DISC

You can protect a disc to prevent the content recorded on it from being erased, edited or re-recorded.

Only DVD-RAM and DVD-RW (in VR mode) can be protected.

Select ÒPROTECT DISCÓ and select ÒONÓ to protect the disc.

To cancel the disc protection, select ÒOFFÓ.

UNDO FINALIZE

You can cancel the finalization of a finalized DVD-RW (in VR mode).

You cannot cancel the finalization for discs other than above. You can record or edit on a disc whose finaliza- tion has been canceled.

Select ÒUNDO FINALIZEÓ, and the screen below will appear.

UNDO FINALIZE

START CANCEL

¥When you select ÒSTARTÓ and press ENTER, the cancelling finalization will start. The screen below will appear.

UNFINALIZING

PLEASE WAIT

¥When you select ÒCANCELÓ and press ENTER, the DISC SETUP screen will appear.

NOTES:

 

¥

During unfinalizing, the cursor will move repeatedly.

 

 

When cancelling finalization is complete, ÒUNDO

 

 

FINALISING COMPLETED PRESS ENTERÓ will ap-

 

 

pear. Press ENTER to clear the screen.

 

¥

The cancelling finalization process may require a few

 

 

 

minutes to about 1 hour according to disc type or the

 

 

amount of free space on the disc.

 

¥

When the discÕs finalization cannot be canceled, you

Various

 

cannot select ÒUNDO FINALIZEÓ.

 

 

DVD-RAM Physical Format

settings

Physically formats a DVD-RAM disc. Whenever you use

 

a new disc for the first time, be sure to format it.

NOTE:

The physical format process may require about 1 hour according to disc condition.

This section describes the other setting in SYSTEM SETUP

Preparation:

¥Turn ON the TV and set it to the video input mode.

¥Select ÒOTHERÓ from ÒSYSTEM SETUPÓ. For the pro- cedure, see steps 1 to 3 in ÒUsing the SETUP MENUÓ on page 24.

SETUP MENU

TIMER REC SET

LANGUAGEOTHER

 

SYSTEM SETUP

PARENTAL

AUTOMATIC

 

DIMMER

 

AV SETUP

DISPLAY/CALLCLOCK

ON

REC SETUP

 

DISC SETUP

 

CH SETUP

 

OTHER

 

OTHER

 

 

 

DIMMER (Brightness of the display window)

You may adjust the brightness or turn off the display on the front panel of the unit. Select ÒDIMMERÓ and select the display window status from the below.

AUTOMATIC: When the power is on, the display win- dow appears bright. When the power is off, it appears dark.

DIM:The window display always appears dark.

OFF: When the power is on, the display win- dow appears dark. When the power is off, it is turned off.

DISPLAY/CALL (Turning the screen dis- play “ON” or “OFF”)

You can turn off the screen display that is output to the TV screen by this unit. Select ÒDISPLAY/CALLÓ, and select ÒONÓ or ÒOFFÓ.

ON: The screen display appears.

OFF: Nothing but the SETUP MENU and error mes- sages appear.

29

2J40101A P23-33

29

3/4/06, 10:43 AM

Page 28 Page 30
Image 29
Page 28 Page 30
Contents VR5SU Location of the required Marking IntroductionAccessories CleaningPower Source POWER-CORD ProtectionLightning Power LinesOverloading Object and Liquid EntrySafety Check Replacement PartsConnecting Laser Beam Disc TrayContents Recording Tape playbackEditing the disc DubbingPlayback function FeaturesRecording function Edit functionHandling discs DiscDiscs which can be played back Discs which cannot be played backVideo mode VR modeDiscs on which video can be recorded Recording formatWhen recording in the Video mode When recording in the VR modeDisc playback in other players Title/Chapter/TrackRear Parts and functionsFront Appears when a CD-R is inserted Appears when a CD is insertedAppears when a CD-RW is inserted Appears when a DVD-Video is insertedInput Select Remote controlInserting Batteries into the Remote Control Power SourceRemote control basics To USE AC Power SourceSeparate UHF and VHF antennas Combination UHF/VHF antenna with 75 ohm coaxial cableDVD/VCR to TV Connection Antenna connectionsCable TV connections Using the DVD/VCR tuner to select channelsAllows Recording of nonscrambled channels AllowsTo connect Connections with the TV or audio component To switch the output signals Progressive/InterlaceConnect to a TV with Audio/Video output Connect to a TV with S-Video outputConnect to a TV with Hdmi output Connect to an AV Amplifier with built-in digital surround Connecting the optical digital cableConnect to a stereo amplifier with audio output Auto clock setting Auto clock setting / Setting the video channelSetting the video channel PreparationEnter Using the Setup MenuVarious settings OSD Language Setting the languageDVD Menu AudioTemporarily cancelling parental con- trol Setting the parental controlTo cancel the locked parental control level Selecting parental controlClock manually Setting the clockAuto Clock Standard Time Time zoneNEW Disc Format Setting the discReformat FinalizeUndo Finalize Setting the disc / Other System SetupProtect Disc Still Mode Setting the screenTV Screen LINE1 INPUT/LINE2 InputBrightness Setting the image quality / Setting the audioDRC External Audio InputSetting the audio / Setting the recording TV/CABLE Select Setting the channel / Setting other itemsAuto CH Memory Jpeg IntervalPress OPEN/CLOSE Playback procedureDisc playback Preparation Playback by selecting a titlePress Title Menu Title MenuChecking media information Symbols indicate that the player is in chase playbackCurrent recording PositionSpecial playback Instant skip / Locating a specific scene Play mode screen will appearInstant skip Locating a specific sceneInstant replay Repeat playbackRepeat playback Title, Chapter repeat playbackDVD menu Title selection / DVD menuTitle selection Changing angles Changing angles / Zooming / Karaoke playbackZooming Karaoke playbackTo turn off the PBC Video CD Version Changing soundtrack languageSubtitles Various operations on CD ENTER, Òhideó will be canceledPlaying back a selected track Excluding specified trackRepeat playback of selected track Random playbackRepeat playback of all tracks Playing back programsWhen the file to be displayed is selected Using the Browser screenMP3/WMA/JPEG/DivX playback Limitations on MP3/WMA/ JPEG/DivX CD playbackPlaying back MP3/WMA files MP3 CDPress Enter to play the selected picture Playing back Jpeg filesPlaying back DivX video files DivX¨ video specificationsMP3/WMA/JPEG/DivX¨ playback Loading and unloading a cassette tape Cassette tape playback Forward/Reverse picture search modeTo stop playback To rewind the tape or forward it rapidlyPicture search Adjusting tracking conditionStill picture Slow motionVideo index search system Zero Return function / Video index search systemZero Return function Types of disc Read this before recording on discRecording modes Disc remaining timeCopy Free unrestricted recording Images that cannot be recordedCopy Never recording prohibited Copy Once one-time recordablePress the numeric keys or CH / to select the channel to be Recording a TV programVHF/UHF/CABLE Channels Press REC/OTRTo stop recording Auto Rewind featureTo stop recording temporarily Recording one program while watching anotherTo cancel OTR One-touch Timer Recording OTRRecording mode For the recording mode, see on Set the TV/CABLE option to the appropriate position SeePress Setup Setup Menu screen appears Timer recordingSetting timer recording Preparation Press To select Òendó and press Enter Once Recording on the selectedChecking or changing the timer recording Stopping the timer recordingCancelling the timer recording Case Timer programs-overlapStill playback Chase PlaybackFast forward/Review playback Locating a chapterOutput selection for DVD Stereo recording and playbackOutput selection Original title Editing the discPlaylist Editable itemsPress Editing menu of original title will appear Editing a playlistCreating a playlist Press Enter Keyboard screen will appear Changing a title nameUse the keyboard screen to enter the title name Press Display to return to the title menuPress Enter Edit Title screen will appear Erasing a scene Edit titleTo select the playlist Editing the disc Combining the title Erasing a playlist Press Enter ADD Chapter Mark screen will appear Editing an original titleAdding a chapter mark Combining chapters Changing an original title name # *&% Press To select the original title Erasing an original titleChanging a disc name Changing a disc nameYou can change a disc name from the title menu Press To select Òdisc Nameó To display the editing menuKeyboard screen types Using the keyboard screenInputting characters There are two methods for inputting charactersErasing a character Cancelling character input functionSelecting between uppercase and lowercase letters Determining a nameDubbing Dubbing a tape onto a discYou can record video or audio on a video tape onto a disc ENTER. Dubbing startsDubbing a disc onto a tape ¥ To cancel dubbing, press STOP, or select Ònoó and pressDubbing only the specified titles or the playlist Dubbing startsWhen a video is recorded using this unit Preparation Dubbing using other equipment¥ Turn on the TV and set the unit to the video input mode You can connect another VCR or camcorder to dubbingDubbing Cable GlossaryDTS MP3PBS Language code list DVD Problems and troubleshootingSymptoms Possible Solutions DVD/VCR Video head cleaning Problems and troubleshooting / Video head cleaningSymptoms Possible Solutions VCR Video head cloggingCause Possible Solutions Error/Warning message listGeneral SpecificationsVCR section DVD sectionLimited Ninety 90 Day Warranty on Labor Limited warrantyHow to Obtain Warranty Services Memo 2J40101A P88-BACK 06, 1046 AM
Top Page Image Contents