Toshiba D-VR4XSU owner manual TV/Cable Select, Auto CH Memory, CH Add/Delete channels, Clock

General Settings

3 If you wish to cancel the set rating level temporarily, select “yes” with or , then press ENTER. If the password has been selected, the password input screen will appear.

Alternatively, if the password has not been set, play- back will commence. If you don’t know (or have for- gotten) the password, select “stop”.

Then press OPEN/CLOSE to remove the disc.

4 Use the numeric keys to input the password.

• To interrupt the input process, press RETURN.

5 Playback will commence if the entered password was correct.

NOTE:

This temporary cancellation of the rating level will re- main active until the disc is ejected.

When the disc is ejected, the original rating level will be set again automatically.

This DVD/VCR is equipped with a channel memory fea- ture that allows you to skip channels up or down to the next channel set in memory, hence skip over unwanted channels.

Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.

TV/Cable Select

Select “TV/Cable Select” and select “TV” or “Cable”. TV: VHF/UHF channels

Cable: CABLE TV channels

Auto CH Memory

The VCR can receive a maximum of 181 channels by presetting the channels into memory.

When you select “Auto CH Memory” and press ENTER twice, the Auto CH Memory function will be activated. The channel display will count up and when finished, the screen returns to normal.

CH Add/Delete (channels)

You can add the channels you want or delete the chan- nels you do not want manually.

Select “CH Add/Delete” and press ENTER.

1 Press or to select the channel then press

ENTER.

2 Press ENTER to select “Add” or “Delete”.

Clock

The clock is set to the correct time automatically, but it can also be set manually. The clock can be set for day- light saving time and time zone.

GENERAL				Auto
				Manual
Parental						Various
			Standard Time
					Auto
CH Add/Delete						settings
Password
TV/Cable Select			Daylight		Auto
Auto CH Memory			Saving Time
Clock
	Select	ENTER	Enter	RETURN	Back
SETUP	End

Auto

You can automatically set the clock by selecting “Auto”. When you want to set the auto clock function to off, se- lect “Manual”. (See page 26.)

Standard Time (Time zone)

In the rare event that you live within the broadcast range of two stations in two different time zone, the DVD/VCR may recognize the wrong station for the auto clock set.

Time zones and correction times

Atlantic:	GMT – 4 hours
	(GMT: Greenwich Mean Time)
Eastern:	GMT – 5 hours
Central:	GMT – 6 hours
Mountain:	GMT – 7 hours
Pacific:	GMT – 8 hours
Alaska:	GMT – 9 hours
Hawaii:	GMT – 10 hours
Auto:	AUTO SET

NOTES

•When shipped from the factory, the “Standard Time” is set to “Auto”.

•After making the auto clock setting, in some cases the clock may display another time zone.You can cor- rect the clock by selecting your time zone setting above.

•When the clock is not set or you set the clock manu- ally, the time zone setting is not available.

25

2H5-01 P22-30 25 7/25/05, 23:19