Toshiba D-VR4XSU owner manual Dubbing using other equipment, Disc with enough recording space

Dubbing using other equipment

You can connect another VCR or camcorder for dubbing.

Typical connection: When using this unit as a recording device

Playback VCR	Playback Camcorder
	To AV jack
To Video OUT	To Audio (R) OUT
	Recording VCR
	To Audio (L) OUT
AUDIO/VIDEO cable (supplied)
Recording VCR

To Video IN To Audio (R) IN

To Audio (L) IN

NOTES:

•If using a monaural VCR or other equipment, connect Audio (L) IN jack to Audio OUT using only one audio cable.

•When this unit is used as a play- back device, a mark or a charac- ter displayed on the screen is also dubbed as an image. When the screen display is set to OFF, see “Display” on page 26.

•If no special permission is obtained from the copyright owner, videos recorded from TV programs or movies can only be used for your own personal enjoyment.

•You may not dub a copy protected video or DVD disc.

•The audio mode for the audio in- put jack can be selected, choos- ing either stereo or monaural. Se- lect “External Audio Input” from Easy Menu and select from the be- low.

Stereo: The sound is treated as stereo sound.

L CH: The sound is treated as the monaural sound of the left channel.

R CH: The sound is treated as the monaural sound of the right channel.

To Video IN To Audio (R) IN

To Audio (L) IN

AUDIO/VIDEO cable (not supplied)

You can also connect to the audio/video input jack (L1) at the rear side of this unit. In addition, each S-Video input jack at the front and rear sides can also be used.When you use S-Video input jack, set the Line1 Input/Line2 Input setting to “S-Video” (see page 27).

When a video is recorded using this unit

Preparation:

	a disc with enough recording space.	Dubbing
• Turn ON the TV and set the unit to the video input mode.
•	Load a video tape where the erase-protection tab is not activated or
•	To record onto a video tape, set the unit to VCR mode, whereas to
	record onto a disc, set it to DVD mode.

1 Press INPUT SELECT and set the channel to L2 (or L1). L1 (LINE 1): on the rear panel

L2 (LINE 2): on the front panel

Confirm that L2 (or L1) appears on the display window.

2 Press REC MODE/SPEED and select the recording mode. VCR: SP or SLP (See page 46)

DVD: SP, LP, SLP or XP (See page 50)

3 Press REC/OTR on this unit, then press PAUSE/STILL.

4 Press the PLAY button on the playback device, then press the PAUSE/STILL button.

5 Release the recording pause and the playback still simultaneously to begin the duplicating process.

6 Press STOP to stop dubbing.

81

2H5-01 P74-81 81 7/25/05, 23:23