Toshiba D-VR4XSU General Settings / Setting the Video, Manual, TV Screen, Daylight Saving Time

Various settings

General Settings / Setting the Video

Daylight Saving Time

You can set the clock to daylight saving time automati- cally or manually.

To select daylight saving time, select “Daylight Saving Time” and select “On”, while to cancel the daylight sav- ing time, select “Off”.

On: For manual setting (forward 1 hour)

Off: For manual setting (back 1 hour)

Auto: For automatic setting (read XDS in the signal)

NOTES:

•When you want to set the Daylight Saving Time manu- ally, on the first Sunday in April you set it to “On”, and on the last Sunday in October you set it to “Off”.

•When the clock is not set, the daylight saving time setting is not available.

•When there is no daylight saving time in your area, always select “Off”.

Manual

You can manually set the date, year and present time with the remote control.

1 Press or to select “Manual” and press

ENTER.

2 Select the desired items using or (month, date, year, hour, and minute), then press or to set the value of the selected item.

3 Repeat step 2 to set the date, year, present time and Daylight Saving Time. Press ENTER.The Setup Menu will close.

This completes clock time setting.

This section describes video settings.

Preparation:

•Turn ON the TV and set it to the video input mode.

•Select “VIDEO” from “Setup Menu”. For the proce- dure, see steps 1 to 3 in “Using the Setup Menu” on page 23.

VIDEO

4:3 Pan&Scan

4:3 LetterBox

16:9

TV Screen

Display

Line1 Input

Line2 Input

E.B.L

Select ENTER Enter RETURN Back

SETUP End

TV Screen

You can select the TV screen size to suit the screen image.

Select “TV Screen” and select screen size from the be- low.

4:3 Pan&Scan

It displays a wide picture across the whole screen with left and right edges automatically cut off.

4:3 LetterBox

Select this mode when connecting to a conventional TV. When playing back a wide screen DVD disc, it dis- plays a wide picture with black bands at the top and bottom of screen.

16:9

Select this mode when connecting to a wide-screen TV. A wide-screen picture is displayed in full size.

NOTE:

If the DVD disc is not formatted in the Pan&Scan for- mat, it displays a 4:3 aspect ratio.

Display (Turning the screen display “On” or “Off”)

You can turn off the screen display that is output to the TV screen by this unit. Select “Display” and select “On” or “Off”.

On: The screen display appears.

Off: Nothing but the Setup Menu and error messages appear.

26

2H5-01 P22-30 26 7/25/05, 23:19