Toshiba D-VR4XSU Stopping the timer recording, Checking or changing the timer recording

Timer recording

NOTES:

¥Recording starts a few seconds be- fore the preset starting time. Timer recording starts before the preset time; one second for DVD, or five seconds for VCR.

¥You can playback the DVD during the VCR timer recording. You can also playback the VCR during the DVD timer recording.

¥You cannot record the DVD during the VCR timer recording. You also cannot record the VCR during the DVD timer recording.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability.

11 When you enter the other program for the timer recording, re peat the steps 3 to 10.

12 Press SETUP.

The Timer Record Set screen disappears and the display will return to the normal screen.

13 Press TIMER REC. The timer indicator Ò Ó will appear on the display and the unit stands by for recording.

Stopping the timer recording

After the timer recording has started, you can cancel the timer recording (but continue recording), or stop recording completely if you want.

To cancel the timer recording, press and hold TIMER REC for more than 2 seconds. The timer indicator Ò Ó disappears from the display and recording continues. Press STOP to stop recording completely.

Checking or changing the timer recording

When you want to check the selected timer recording, follow the steps 1
and 2 of ÒSetting timer recordingÓ on page 55 and display the Timer	Recording
press ENTER. The program screen will appear. Do step 4 to step 10 on
Record Set screen.
To change the timer recording, select the program to be changed and
page 56.
When you want to change the program after the timer recording has
started, stop the timer recording.

Cancelling the timer recording

Display the Timer Record List screen.

Select the program you want to cancel and press CANCEL. ÒDelete

selected Title. Continue?Ó will appears. Press or to select ÒYesÓ and press ENTER.The selected program will be erased from the Timer Record List.

In case Timer programs overlap

Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.

In this case, the next recording time is delayed a maximum of about 1 minute.

8 : 00 9 : 00 10 : 00 11 : 00

Program 1

Program 2
		Deleted Parts
Program 3
		Non Recorded Portion Parts
Recording	Prog.1	Prog.2	Prog.3
Control Settings

57

2H5-01 P53-59 57 7/25/05, 23:21