Toshiba D-VR4XSU Setting the Record / Setting the Disc, Auto Chapter, Black Level REC, Initialize

Setting the Record / Setting the Disc

This section describes recording settings.

Preparation:

•Turn ON the TV and set it to the video input mode.

•Select “RECORD” from “Setup Menu”. For the procedure, see steps 1 to 3 in “Using the Setup Menu” on page 23.

RECORD

Off

10min

15min

Auto Chapter

Black Level(REC)

30min

Select ENTER Enter RETURN Back

SETUP End

Auto Chapter

You can automatically make chapter marks on the DVD to be recorded.

Select “Auto Chapter” and select the interval between chapter marks from the below.

Off: The automatic chapter is not used.

10 min: The interval is set to 10 minutes.

15 min: The interval is set to 15 minutes.

30 min: The interval is set to 30 minutes.

Black Level (REC)

You can set the black level when you do recording.

Standard: Records at the level of the input source.

Enhanced:Lowers the level 7.5IRE and records.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copy- right Laws of the United States and other countries, and may subject you to civil and/or criminal liability.

You can format, protect, or finalize a disc.

Preparation:

•Turn ON the TV and set it to the video input mode.

•Select “DISC” from “Setup Menu”. For the proce- dure, see steps 1 to 3 in “Using the Setup Menu” on page 23.

DISC					Various
				VR
				Video
Protect Disc					settings
Initialize
Finalize
Rename Disc
DVD-RAM Physical Format
	Select	ENTER	Enter	RETURN	Back
SETUP	End

Initialize

You can format a recorded DVD-RAM/RW.

Check the content of the disc before format. If you for- mat the disc, the recorded content of the disc will be erased.

Select “Initialize” and select the mode from the list below.

Video: Format the disc in the Video mode.

VR: Format the disc in the VR mode.

When “VR” or “Video” is selected, the following mes- sage screen will appear.

Initialize

OK to proceed?

Yes No

•When you select “Yes” and press ENTER, Initializing will start. The screen below will appear.

Initializing...

Please wait.

3 %

•When you select “No” and press ENTER, the DISC screen will appear.

NOTES:

When the Initialization finished, “Initializing completed. Press ENTER.” will appear. Press ENTER to return to the DISC screen.

29

2H5-01 P22-30 29 7/25/05, 23:19