Ayre Acoustics DX-7 owner manual Setup Navigator, Video and Composite Configuration

HVSync RGB Prog Rsrv C 0% 16 - 235 RGB Rsrv A

SoG YPbPr Intrlc Rsrv D 7.5% 0 - 255 YCbCr Rsrv B

S-Video and Composite Configuration

The S-video and composite outputs only output interlaced signals. There are different standards for these signals in different parts of the world. The switch marked “0%” and “7.5%” controls whether the black level is changed by adding setup to the NTSC signals. PAL signals are unaffected by the setting of this switch.

Setup is normally only used in North America. If you live in the USA, Canada, or Mexico, setting this switch to “7.5%” will produce a signal that matches your other video source components. Residents of other countries should set this switch to “0%”.

Please refer to the chapter “Optimization and Customization” for additional information on playing DVDs from other countries.

Setup Navigator

The Ayre DX-7 has a wide variety of system settings that may be configured via the On-Screen Setup Menus (page 49). To simplify the initial setup of your player, the Setup Navigator allows you to configure the basic settings via a series of on-screen questions.

11