Ayre Acoustics DX-7 owner manual Condition Memory Function

INPUT

the disc is reloaded, the “LAST” indicator will again light. To begin play at the memorized location, press “Last” on the remote control while the disc is stopped.

Nearly all DVDs will automatically begin playing when loaded. Be sure to press the “Stop” button before pressing the “Last” button.

Pressing “Play” will begin playback at the start of the disc.

Please note that the “Last” button on the remote control corresponds to the “Condition Memory” function on the DX-7.

To clear the “Last Memory” location, press the “Sleep” button to activate the “Clear” function while “Last Memory” is displayed in the on-screen display.

“Last Memory” is only displayed for a few seconds after the DVD is loaded. To clear the “Last Memory” location at any time, press “Last Memory” to mark a new location, and then press the “Sleep” button to activate the “Clear” function.

Condition Memory Function

The “Condition Memory” function allows you to memorize four settings for each of up to 15 DVDs. These settings comprise:

•Soundtrack

•Subtitle

•Angle

44