Ayre Acoustics DX-7 owner manual Picture Quality, Video Out

Audio1 Audio2 Video Language General

TV Screen – 16:9 (Wide)

Picture Quality Cinema

S-Video Out - Animation

Still Picture - Standard

On Screen Display – Position - Normal Angle Indicator – On

Move SETUP Exit

Audio1 Audio2 Video Language General

TV Screen – 16:9 (Wide)

Picture Quality – Standard

S-Video Out S1

Still Picture - S2

On Screen Display – Position - Normal Angle Indicator – On

Move SETUP Exit

display is a standard model, configure this setting to “4:3 (Letterbox)”.

It is recommended not to select the “4:3 (Pan & Scan” setting, as this only functions properly when allowed by the DVD. To date there are virtually no widescreen DVDs that support the “Pan & Scan” setting.

Picture Quality

This setting has no effect on the operation of the Ayre DX-7 with progressive scan video. Its original purpose was to change the interlaced video signals to conform with the video standards used in various countries. Instead the DX-7 allows these adjustments to the video signal to be made with switches on the rear panel (page 11).

S-Video Out

This setting has no effect on the operation of the Ayre DX-7 with progressive scan video. Its original purpose was to send aspect ratio information to the video display on the S-video connection. Instead the DX-7 outputs aspect ratio information via the Control Port (page 30).

55