Changing Source Settings
How to change the settings
Figure 10
Changing the number of speakers playing
In the Settings menu on the media center display or on the TV screen, move around and make changes
by using the selection buttons shown.
On the display or the screen, the same actions apply:
•Press the left, right, up or down arrows to get to the option you want.
•Press Enter or the left arrow to confirm your selection and move back to the features column.
•Repeat those steps for each change you want to make.
•Press the Exit button on the remote control to leave the Settings menu.
The progression below shows how to change the number of speakers used in FM (Figure 10).
A.The FM Settings menu appears on the TV screen with 5 speakers as the default setting.
B.Arrow buttons move right and up or down to change the number of speakers playing.
C.Enter or left arrows confirm the new setting and move back to the list of tuner attributes.
A. |
| B.. | C. | |
|
|
|
|
|
English
You can use the actions above to restore the original settings, too. Do this if you do not like the effect of a change you have made, or accidentally made a change you did not intend.
The original (default) settings for each source are shown as the first option for each feature on the pages that follow.
Note: You can restore all default settings by choosing Restore Settings in the Systems menu, under Media Center. This reverses all changes you have made in both the Settings or System menus. Instead of making this overall change, you can note the default setting listed on the pages that follow, then
25