Reference
Remote control maintenance
Figure 17
Installing the remote control batteries
Changing the batteries as needed is the only regular maintenance required. However, the switches inside the remote battery case may be changed, as needed. Additional remotes for use in other rooms may need their switches changed, too. For that, refer to “Bose® link remote switch settings” on page 39.
Replacing the remote control batteries
Replace all four batteries when the remote control stops operating or its range seems reduced. Alkaline batteries are recommended.
1.Slide open the battery compartment on the back of the remote (Figure 17).
2.Insert four AAA or
3.Slide the battery compartment cover back into place.
AAA batteries (4)
+
+ +
+
Battery
compartment
Battery
compartment
cover
Changing house code settings
Each LIFESTYLE® remote control uses a house code that corresponds to the house code set in the media center, enabling the two to communicate. If another LIFESTYLE® system nearby creates a conflict with your system, you can easily set a new house code in your media center and its remote control(s) with steps that follow.
Using the remote control:
1.Open the remote control battery cover and locate the miniature switches (Figure 18 on page 38).
2.Move one or more of switches 1, 2, 3, or 4 in the opposite direction from its current setting. Use a paper clip, ball point pen, or similar object.
Note: DO NOT change any other switch settings. Moving other switches may disable your remote control.
3.Replace the battery cover.
English
37