English
Using System Menus
Video options
Press the System button on the LIFESTYLE® remote control. Move right to see a preview of video features. Press the Enter button to move into an active display of submenus.
Figure 13
Video preview
Video
Select Video to adjust these system options
TV Power | Video Connector |
TV Power Status | Video Black Level |
TV Aspect Ratio | Video Format |
Widescreen DVDs | Progressive Scan |
|
|
|
|
|
|
|
|
Important Note:
DO NOT change settings for Component video or Progressive scan in the System menu. Doing so can cause your TV screen to go blank, making completion of the process difficult.
Instead refer to “Activating component or progressive scan connections” on page 11.
Active Display Item | Default Settings; | Effect of this Setting |
Options | ||
|
|
|
TV Power | Automatic | TV turns on automatically when a video source is selected.* |
| Manual | TV does not come on automatically. |
| Euro | TV responds to SCART connector input. |
|
|
|
TV Power Status | TV Not Detected | Indicates: TV Sensor not installed or not positioned correctly. |
(not a setting) | TV On | Indicates: TV Sensor installed and functioning properly. |
| ||
|
|
|
TV Aspect Ratio | Normal | 4:3 ratio screen display. |
| Widescreen | 16:9 ratio widescreen display. |
|
|
|
Widescreen DVDs | Modified | DVD video reformats, as needed, to fit a 4:3 TV screen. |
| Unmodified | DVD video does not reformat automatically. |
|
|
|
Video Connector | Composite, | System works with composite and/or |
(See Important Note above.) | Component | System works with component TV connection. |
|
|
|
Video Black Level | Normal | Screen black level generally appropriate for TVs. |
| Extended | Reduces screen black level, appropriate for certain TVs. |
|
|
|
Video Format | NTSC | Correct for NTSC (U.S. standard) monitors. |
| PAL | Correct for PAL (European standard) monitors. |
|
|
|
Progressive Scan | Off | Screen image repaints in standard style. |
(See Important Note above.) | On | Screen image repaints in advanced style (if available on the TV). |
| ||
|
|
|
*With most TV models, the TV sensor must be installed and positioned to detect if the TV is on or off. In Europe, a SCART connector communicates with the TV. If your system setup is different from either of these, using the automatic feature is not an option.
Note: For information on using the TV sensor, refer to “Installing the TV on/off detector” in your
Installation Guide.
32