4.In the LCD display q appears "SUCCESS".
5.With the EXIT button j you exit the mode.
Additional functions
>> To operate one of the programmed devices with the URC first press the corresponding device button r.
>> Then point the URC to this device and press the desired button.
>> Put the number buttons o exactly as you do with the original remote control. Before you make a two digit
entry press the 
button s.
>> With the 
button a you can select the respectively last selected programme memory slot.
>> Press the GUIDE button g to start the electronic pro- gramme guide of a device equipped with this function.
>> Press the INFO button k to show current programme information from the target device.
>> Via the MENU button 1( you access the dialogue for the setting of the respective target device.
All OFF
Note:
With the button 
ALL OFF (all off) w all devices can be automatically switched off. For this press the ALL OFF button w twice within 2 seconds. This will only function under the fol- lowing circumstances:
1.A visible connection exists between all the devices and the URC.
2.Automatic code search, brand code search and MACRO function are not active.
3.All target devices must be suitable for remote control switch off.
To automatically switch on all devices again press the button 
w once more twice within 2 seconds.
- 23 -