Sony CDP-CX250 Specifying the Next Disc to Play, Locating a Specific Track or a Point in a Track

Playing CDs

Notes

•When searching input characters, blanks and symbols before the first character in the Disc Memo are ignored.

•When searching input characters, upper and lower cases cannot be differentiated.

3Turn the JOG dial to find the disc you want.

As you turn the JOG dial, the Disc Memos starting with the input character appear in the display.

4Press ENTER to select the disc.

In Program Play mode, the disc will be added to the end of the program.

To cancel Memo Search

Press MEMO SEARCH again.

If there is no more Disc Memo starting with the input character in Step 3

The input character changes to the next one when you turn the JOG dial.

Specifying the Next Disc to Play

You can specify the next disc to play while playing a disc in Continuous or 1 DISC Shuffle Play mode.

While playing a disc, turn the JOG dial until the disc number or Disc Memo (see page 17) you want appears in the display.

Next disc number

ALL DISC S				NEXT
	CD1		38DISC
NEXT DISC	TRACK	MIN		SEC

*DISC-38*

Next disc number or

Disc Memo appears for a while.

After the current disc is played, the next disc you have specified starts playing.

If you want to skip to the next disc right away, press ENTER while playing the current disc.

To cancel the disc you have specified

Press CONTINUE twice.

Locating a Specific Track or a Point in a Track

You can quickly locate any track while playing a disc using the -/±(AMS: Automatic Music Sensor) buttons or number buttons on the remote. You can also locate a specific point in a track while playing a disc.

-/±

TRACK/SPACE

Number buttons

ENTER

=/+ 0/)

To locate	Press
the next or	± repeatedly until you find the
succeeding tracks	track
the current or	- repeatedly until you find the
preceding tracks	track
a specific track	TRACK/SPACE, the number button
directly Z	of the track, and then ENTER. When
	you locate a track with a number over
	10, press the 10’s digit first, then the
	1’s digit.
a point in a track	)(forward) or 0(backward) and
while monitoring the	hold down until you find the point
sound Z
a point in a track	)(forward) or 0(backward) and
quickly by observing	hold down until you find the point
the display Z	during pause. You will not hear the
	sound during the operation.

12EN