Sony CDP-CX250 Creating Your Own Program Program Play, 14EN, Creating a program on the player

Playing CDs

You can go to the next disc during 1Ê DISC Shuffle Play

Press DISC SKIP +.

You can specify the next disc to play during 1Ê DISC Shuffle Play

Turn the JOG dial to specify the next disc. After all the tracks on the current disc are played in random order, the next disc starts playing. If you want to skip to the next disc right away, press ENTER while playing the current disc.

Notes

•You cannot specify the next disc to play during ALL DISCS Shuffle Play.

•Even if you press por turn off the player during ALL DISCS Shuffle Play, the player remembers which discs/ tracks were played and which were not. Therefore, if you want to start ALL DISCS Shuffle Play again from the beginning, be sure to repeat the procedure from Step 1.

Creating Your Own Program (Program Play)

You can arrange the order of the tracks and/or discs to create three different programs and programs are stored automatically. AÊ program can contain up to 32 “steps” — one “step” may contain a track or a whole disc.

You can make programs using the controls on the remote as well as ones on the player. However, the programming procedures are different.

Creating a program on the player

PROGRAM -/±ENTER JOG

á CHECK CLEAR

1Press PROGRAM until the program number you want (PROGRAMÊ 1, 2 or 3) appears in the display. If a program is already stored in the selected program number, the last step of the program appears in the display. When you want to erase the whole program, hold down CLEAR until “ALL CLEAR” appears in the display (see page 16).

2Turn the JOG dial until the disc number you want appears in the display.

PROGRAM1 CD1 2O

DISC

*DISC-2O*

3To program a whole disc, skip this step. Press -/±until the track number you want

appears in the display.

PROGRAM1	CD1			2O
DISC		TRACK		STEP
2O			3	1

Track number

4Press ENTER or PROGRAM.

The track being programmed

				CD1			2O
	PROGRAM1
			DISC		TRACK			STEP
		2O			3			1
The disc being						Playing order
programmed

5To program other discs/tracks, do the following:

To program	Repeat Steps
Other discs	2 and 4
Other tracks on the same disc	3 and 4
Other tracks on other discs	2 to 4

6Press áto start Program Play.

To cancel Program Play

Press CONTINUE.

14EN