Sony CDP-CX250 manual Playing Using a Timer, 16EN, Checking the programmed order

Playing CDs

Checking the programmed order

You can check your program before or after you start playing.

Press CHECK.

Each time you press this button, the display shows the disc and track number of each step in the programmed order. (When a whole disc is programmed as one step, “ALL” appears instead of the track number.) After the last step in the program, the display shows “END” and returns to the original display.

Changing the programmed order

You can change your program before you start playing.

To	You need to
Erase a track or disc	Press CHECK until the track or
	disc you do not want appears in
	the display, then press CLEAR
Erase the last track or	Press CLEAR. Each time you
disc in the program	press the button, the last track or
	disc will be cleared.
Add tracks or discs to the	Follow the programming
end of the program	procedure
Change the whole	Hold down CLEAR until “ALL
program completely	CLEAR” appears in the display to
	erase the whole program, then
	create a new program following
	the programming procedure

Erasing the programs stored in memory

1Press PROGRAM repeatedly in the stop mode until the program number (PROGRAM 1, 2 or 3) you want to erase appears in the display.

2Hold down CLEAR until ”ALL CLEAR” appears in the display.

Playing Using a Timer

You can start playing a disc at any time you want by connecting a timer (not supplied). Please also refer to the instructions for the timer if you need help.

TIMER Play mode buttons

1Press one of the play mode buttons to select the play mode you want.

2Set TIMER on the player to PLAY.

3Set the timer to the time you want.

The player turns off. When the set time comes, the player turns on and starts playing.

4After you have used the timer, set TIMER on the player to OFF.

16EN