CHAPTER 4
OPERATION PROCEDURES
1Getting Started with your machine
Please assure the following instructions before you switch on the machine:
1.1Voltage check: Before power cable is connected, please check the voltage of this appliance against the supply.
Input voltage range 100~240V, frequency range
CAUTION - Damage would be caused if incorrect power voltage applied.
1.2Hard Disk connection: Make sure the
2Recording
2.1 Press the REC key to enter the Recording Mode. And press the STOP key to stop recording.
2.2On information bar the "MUX" or "QUAD sign will be indicated on the screen, it means you select MUX or QUAD recording.
2.3"15P" sign will be indicated in top right corner on the screen, it mean the recording speed you selected. 15P means 15 fields per second.
2.4O" sign will be indicated in center corner on the screen, it means the marked channel is recorded.
2.5For more information on Setting up Recording Mode, refer to Chapter 3 Record Setup
2.6In Recording Mode, if there is a power failure or power lost for any reasons that cause a shut down of this machine, it will be back to the Recording Mode automatically when power restored.
3 Playback |
|
| |
|
|
| Press the ►PLAY button to |
|
|
| |
| PLAYBACK TYPE SELECT | into playback mode, There | |
| are two ways for searching | ||
|
|
| |
| >TIME SEARCH |
| for video records, use "▲" |
|
| or "▼" key to select a way | |
| EVENT LIST |
| |
| EXIT |
| for searching, there are two |
|
|
| |
|
|
| selections "TIME SEARCH" |
| PRESS [UP，DOWN] TO MOVE | [MENU] TO EXIT | and "EVENT LIST". Arrow |
| mark ">" indicates current | ||
| [RIGHT,LEFT] TO SELECT |
| |
|
| selection, press "◄" or "►" | |
|
|
| |
|
|
| key to start the search. |
16