Sampo DR-S0426 manual Chapter Introduction

Page 5

CHAPTER 1

INTRODUCTION

This product is 4 cameras input appliance with multiple function which will bring you following features:

zDevice can be performed as VHS system with live display, play back and video recording.

zDevice operates in hardware base with no OS (operating system) necessary for more reliability and stability.

zDigitize data storage with M-JPEG compression technology will give you organized video data management without using mess huge traditional video tape.

zSupport various type of camera with real, live mode display.

zMulti-speed recording selection on normal recording mode or alarm recording mode, the highest speed of recording is 30/25 (NTSC/PAL) fields on both mode.

zTitle, contrast, hue and brightness are adjustable for each camera individually.

zSupport up to 2 hard disks (HDD) from 40GB to 400GB compatible & status indicator on screen.

zWhen external alarm is triggered, corresponding cameras number will show up on the monitor with texts.

zSelectable recording qualities (best/high/medium/low).

zRecording can operate manually or gets activated automatically when alarm is triggered.

zMotion detection function available, user can easily adjust sensitive & area of motion detection.

zPlayback record can be searched by time or by event list.

zPlay back mode could not be easier then ever for you to review the video that gets recorded on reverse (x16) and fast forwarding (×4, ×8, and ×16).

zPlay back mode with pause (field by field) for forward.

zEasy operation, setting can be easily modified OSD (on screen display) menu.

zDevice will overwrite data and notice operator on monitor when the HDD is going full.

zHDD capacity status can be show on the screen for better storage management.

zSystem will restore the previous setting and continue camera activity after restart.

zProvide 2 Monitor output & optional VGA output function.

zAlarm notification could be sent via email when motion or external alarms are triggered.

zOptional audio function.

zDate type selectable.

zSupport DVR ID setting for joystick control panel.

zNTSC/PAL switching by OSD menu.

zExternal Alarm NO/NC Selection & Individual Relay On/Off Selection.

zAdvanced buzzer control.

zForce recording under schedule recording in no record mode.

zPassword & key lock protect even power lose.

*New function in boldface

3

Image 5
Contents DR-S0426 / DRE-S0426P Copyright Table of Contents Setup Menu List Chapter Introduction Front Panel Layout Overview ChapterButtons Function List Part Label23 HDD/CDRW Play MenuPower / Power SW VGA Setup DIPEthernet LEDChapter Setup Procedures Time Display Mode System SetupMenu Setup Protect ON/OFF Change PasswordMotion Area Setup Camera SetupCamera Select CAM1/CAM2/CAM3/CAM4 Camera Record ON/OFFRecord Mode MUX/QUAD Record SetupAlarm Record FPS Alarm Record Dwell 1~30SECVideo Loss Alarm ON/OFF Alarm SetupMotion Alarm ON/OFF External Alarm ON/OFFQuick KEY Schedule RecordPlay Event ListPassword Input Overwrite Mode YES YES/NOPassword Correct HDD ManagementHard Disk Formatted Password Incorrect Change PasswordSlave HDD Capacity Slave HDD Left RatioSystem Setup ON/OFF Load DefaultCamera Setup ON/OFF Record Setup ON/OFFGetting Started with your machine Chapter Operation ProceduresRecording PlaybackHard Drive Master Time SearchHard Drive Slave Several ways to perform playbackStart TIME:2005/MAY/05 END TIME:2005/MAY/05 Alarm control VCR BackupHard disk VCRCOM External alarm connectorGND VGA Output DIP1 DIP2 DIP3 DIP4RS-485 control protocol Jpeg Chapter SpecificationsNtsc PAL Chapter Recording Time Length Chapter Hard Drive Installation Procedures Page A11633RM4F17