Hard disk, Vcr, VCR Backup, Alarm control | Sampo DR-S0426 instruction

4Hard disk

Maximum 2 pieces and at lease one hard disk should be connected, the capacity of hard disk from 40GB to 400GB for each.

When you restart the power of this appliance after install or replace new hard disk it will format automatically, we tested the following model for your reference:

Brand	Model	Capacity	Speed (rpm)
Seagate	ST380011A	80GB	7200 rpm
Seagate	ST3120023A	120GB	7200 rpm
Seagate	ST3160023A	160GB	7200 rpm
Seagate	ST3400832A	400GB	7200 rpm
Maxtor	6Y120L0	120GB	7200 rpm
Maxtor	6Y080L0	80GB	7200 rpm
Maxtor	6Y160P0	160GB	7200 rpm
Maxtor	7Y250P0-A	250GB	7200 rpm

We DO NOT suggest Samsung \ Western Digital \ Maxtor DiamondMax 10 series hard drive base on technical examination.

5VCR

1.VCR Backup

The DVR Provides composite signal output for back-up use. You can keep the Image data, and simply just connected BNC connector, at the Back Panel of, with MONITOR OUT Connector. Press VCR REC button, after decided what recording data need to keep, during Play-Back Mode.

6Alarm control

There are three types of alarms that the system can be configured to handle. They are 1.External Alarm, 2.Video Lost Alarm and alarm of 3.Motion Detection.

When alarm are triggered, it changes recording speed to the alarm recording speed. Video Lost alarm is enabled as default and cannot be changed. The buzzer will action and "V.LOSS" sign will be indicated on the screen.