Record setup "MOTION EVENT MIGRATION" must at ON.
In the period of alarm record triggered constantly that the a single EVENT LIST item will be extend while lapsed, thus ENET LIST would show the first triggered channel number on the list and the recording seconds will be extended .
8.HDD MANAGEMENT
| HDD MANAGEMENT |
| Press ▲ or ▼ key on "NETWORK SETUP" & ◄ or ► to | ||
OVERWRITE ENABLE |
| YES | |||
10% | enter: | ||||
HDD FULL WARNING |
| ||||
MASTER HDD CAPACITY | 76GB |
| Use the ◄ or ► button to select items. | ||
MASTER HDD LEFT RATIO 73GB 97% | |||||
MASTER HDD FORMAT | N/A |
| Press the ▲ or ▼ button to confirm the selection. | ||
SLAVE | HDD CAPACITY N/A | N/A | |||
SLAVE | HDD LEFT RATIO | Press MENU back to SETUP MENU. | |||
SLAVE | HDD FORMAT | N/A |
| ||
EXIT |
|
|
|
| |
|
|
| |||
1. OVERWRITE MODE |
| YES (YES/NO) | |||
Use "◄ or ►" button to enable or disable overwriting when HDD is full. When HDD overwrite is enabled, the oldest partition on HDD will automatically be reused, and the oldest images will be overwritten the current images. When overwrite mode is disabled, the HDD Full Warning percentage selection will be appeared and need to be configured.
2. HDD FULL WARNING | 10% (5% / 10% / 15% / 20%) |
Use "◄ or ►" button to select one of the four settings (5% / 10% / 15% / 20%). The default is 10%. The buzzer will turn on when free space left in the HDD go below the set value and alarm again when the total free space left going down each 5%.
3. MASTER HDD CAPACITY | 76GB |
The master HDD capacity will be indicated on the screen, it can't be revised.
4. MASTER HDD LEFT RATIO | 73GB 97% |
The master HDD left ratio sign will be indicated on the screen, it can't be revised.
5.MASTER HDD FORMAT
Use "◄ or ►" button to enter the MASTER HDD FORMAT menu.
PASSWORD INPUT : _ _ _ _
Use the view control button on the front panel to input the number.
is "1" , 
is "2" , 
is "3" , 
is "4"
When you key in the correct password, the screen will be displayed the following message:
PASSWORD CORRECT!
13