Customizing Function Settings
MENU
2/3/5/a
ENTER
SUBTITLE
x
To set the TV system
1 Set the POWER on the main unit to the ON position.
After the power is switched ON, there is a delay of about 3 seconds before the display is lit.
2 Set TV Format according to the connected TV type.
While no disc is inserted, hold the SURROUND button on the main unit depressed and keep pressing the SUBTITLE button on the remote control. Each time these buttons are being held down, the setting changes as follows.
When you insert a DVD Video, Video CD, or audio CD, the various functions of the DVD receiver will be set (reset) according to the
SETUP MENU.
You can customize this setting menu according to your preference.
Setting Steps
1 Press MENU during stop mode.
The SETUP MENU appears.
2 Press 5/a to select a category, then press
ENTER.
Main unit | Remote controller |
→ MULTI (NTSC/PAL switchable)
NTSC
PAL
Remove the disc to customize the PREFERENCES settings.
27