Onkyo L-MS30 Audio setup Preferences, Full 8 steps, Component, To select other language

EN00_L-MS30.book Page 30 Tuesday, September 2, 2003 4:19 PM

Customizing Function Settings

Audio setup

Preferences

DYNAMIC

At the time of Dolby digital DVD playback, the difference of the maximum volume and the minimum volume are compressed. Adjustment is possible in 8 steps, and the range is largest (compression ratio 0) at the time of “FULL” and smallest (large compression ratio) at the time of “OFF”.

Reduce the dynamic range so that even low-level audio can be identifiable without increasing the overall listening volume.

•OFF

Full dynamic range is maintained.

•1/8 - FULL (8 steps)

Dynamic range is reduced.

Notes

•This function works only during playback of Dolby Digital recorded discs.

•The level of Dynamic Range Reduction may differ depending on the DVD.

VIDEO OUTPUT

This setting is only available when a DVD video image is being output by this unit. Choose S-VIDEO in case of connection to the S- VIDEO jacks on the rear, choose COMPONENT in case of connection to the COMPONENT jack. Signals are only output to the selected jacks.

•S-VIDEO

Choose when the TV is connected to this unit’s S-VIDEO OUT jack. The video signal is output from the S-VIDEO OUT jack instead of from the COMPONENT OUT jack.

•COMPONENT

Choose when the TV is connected to this unit’s COMPONENT OUT jack. The video signal is output from the COMPONENT OUT jack instead of from the S-VIDEO OUT jack.

AUDIO

Select the audio language.

•ENGLISH

•FRENCH

•SPANISH

•CHINESE

•JAPANESE

•OTHERS

To select other language

1.Select OTHERS and press the ENTER button.

2.Input a 4-digit code by pressing the numeric buttons on the remote controller (DVD Menu Language Code List, page 61).

3.Press the ENTER button.

Note

Depending on the disc, a language recorded on the disc may be given priority and selected automatically when the disc is loaded regardless of the setting.

30