Onkyo L-MS30 instruction manual Main unit, To start playing

EN00_L-MS30.book Page 63 Tuesday, September 2, 2003 4:19 PM

Main unit

Symptoms

Causes

Remedies

Pages

Playback does not start when			• There is no disc in the DVD receiver.	• Load a disc and press the £/8 button.	36
the	£ 8	button is pressed.	• There are no signals recorded on the side of	• Turn the disc over and properly place it on the	36
	/		the disc being played.
				disc tray.
Playback starts but no			• The TV is not turned on.	• Turn on the TV.	–
image/sound is seen heard.			• The connection cords are not properly	• Properly reconnect the connection cords.	17–23
			connected.
The picture is disrupted			• The picture is slightly disrupted during fast	• This is not a malfunction.	–
when the image is fast			forward and fast reverse operations.
forwarded or fast reversed.
No sound is heard.			• The audio output cords are not properly	• Properly connect the audio cords.	20
			connected.
			• The player is in a special playback mode.	• Press the £/8 button to resume normal	–
				playback mode.
The picture does not look			• A nearby device is generating noise.	• Separate this unit as far as possible from the	–
good or the picture/sound				device you think is generating the noise.
quality is poor.			• The disc is dirty.	• Refer to the “Cleaning Discs” section and	11
				wipe dirt from the disc.
			• The disc is damaged.	• Use a new disc.	–
			• There is condensation on the optical lens.	• Refer to the “Notes on Moisture	3
				Condensation” section and evaporate the
				condensation.
It takes a while for the disc			• Time is required for the unit to detect the disc	• Approximately 10 to 20 seconds are required	–
to start playing.			type and size and for the rotation of the motor	for a disc to start playing, although the time
			to stabilize. This is not a malfunction.	differs depending on the disc.
The tray opens			• The disc is not placed horizontally.	• Properly place the disc on the tray.	36
automatically.
The top and bottom of the			• The video format of the disc being played	• Refer to the “To set the TV system” section,	27, 29
screen cannot be seen, or the			does not match that of the connected TV	and use a disc with the appropriate video
screen becomes black-and-			monitor.	format for your TV or a TV with the
white.				appropriate video format for the disc.
The subtitle is not displayed.			• The DVD disc being played does not contain	• The subtitle cannot be displayed when the	–
			the recording of subtitles.	DVD disc being played does not contain the
				recording of subtitles.
			• The subtitle mode is set to off.	• Press the SUBTITLE button to switch on the	50
				subtitle mode.
The voice (or subtitle)			• The DVD disc being played does not contain	• The voice (or subtitle) language cannot be	–
language cannot be changed.			the recording of more than one audio (or	changed when the DVD disc being played
			subtitle) language.	does not contain the recording of more than
				one voice (or subtitle) language.
The viewing angle cannot be			• The DVD disc being played does not contain	• The viewing angle cannot be changed when	–
changed.			the recording of more than one angle.	the DVD disc being played does not contain
				the recording of more than one angle.
			• You are attempting to switch the angle in a	• More than one viewing angle may be recorded	–
			DVD section where more than one angle is not	only in limited sections in a disc.
			recorded.
Playback will not start even			• A viewing restriction (PARENTAL) has been	• Check the viewing restriction level	31
after a title is selected.			set for the disc.	(PARENTAL) setting.

63