Sony CDP-CA8ES manual Troubleshooting, Specifications

Page 19

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

There’s no sound.

/Check that the player is connected securely. /Make sure you operate the amplifier correctly. /Adjust the playback level using the LINE OUT/

PHONE LEVEL control.

The CD does not play.

/There’s no CD inside the player (“–NOÊ DISC–” appears). Insert a CD.

/Place the CD with the label side up on the disc tray correctly.

/Clean the CD (see page 18).

/Moisture has condensed inside the player. Remove the disc and leave the player turned on for about an hour (see page 18).

The recording level has changed.

/When you connect the amplifier via the VARIABLE LINE OUT jacks, the recording level changes if you adjust the LINE OUT/PHONE LEVEL control on the player or press LINE OUT LEVEL on the remote during recording.

The remote does not function.

/Remove the obstacles in the path of the remote and the player.

/Point the remote at the remote sensor gon the player.

/Replace all the batteries in the remote with new ones if they are weak.

The player functions incorrectly.

/The microcomputer chips may be operating incorrectly. Turn the power off, then turn it back on to reset the player.

Additional Information

Specifications

Compact disc player

Laser

Semiconductor laser

Wavelength

780 – 790 nm

Frequency response

2 Hz to 20 kHz ± 0.3 dB

Dynamic range

More than 100 dB

Harmonic distortion

CDP-CA9ES: Less than 0.0023%

 

CDP-CA8ES: Less than 0.0025%

Output

 

Jack

Maximum

Load

 

type

output

impedance

 

 

level

 

 

 

 

 

LINE OUT

Phono

2 V

Over 10 kilohms

(FIXED)

jacks

(at 50 kilohms)

 

 

 

 

 

LINE OUT

Phono

2 V

Over 50 kilohms

(VARIABLE)

jacks

(at 50 kilohms)

 

 

 

 

 

DIGITAL

Optical

–18 dBm

Wave length: 660 nm

OUT

output

 

 

(OPTICAL)

connector

 

 

 

 

 

 

PHONES

Stereo

15 mW

32 ohms

 

phone

 

 

 

jack

 

 

 

 

 

 

General

Power requirements

Where purchasedÊ

Power requirements

 

 

Europe

220 V – 230 V AC, 50/60 Hz

 

 

Canada

120 V AC, 60 Hz

 

 

Other countries

110 V – 120 V or 220 V – 240 V AC,

 

adjustable, 50/60 Hz

 

 

Power consumption

CDP-CA9ES: 17 W

 

CDP-CA8ES: 15 W

Dimensions (approx.)

430 × 125 × 400 mm

(w/h/d)

(17 × 5 × 15 3/4 in.) incl. projecting

 

parts

Mass (approx.)

CDP-CA9ES: 7.5 kg (16 lbs 9 oz)

 

CDP-CA8ES: 7.0 kg (15 lbs 7 oz)

Supplied accessories

 

Audio cord (2 phono plugs – 2 phono plugs) (1)

Remote commander (remote) (1)

Sony SUM-3 (NS) batteries (2)

EN

19

Design and specifications are subject to change without notice.

Image 19
Contents CDP-CA9ES CDP-CA8ES Conventions WelcomeAbout This Manual For the customers in CanadaTable of Contents Press Press Power to Turn on PlayerBefore you start… Press ContinueOverview UnpackingHooking Up the System Inserting batteries into the remoteIf you have an analog power amplifier Connecting the mains leadTransporting the player Checking the remaining time Using the DisplayChecking the total number and playing time of the tracks Display information while playing a discYou can extend the playing time during Music Scan Replacing Discs While Playing a DiscLocating a Specific Disc To locate PressNumber buttons 10 -/± RM-D645 for CDP-CA9ES Locating a Specific Track or a Point in a TrackNumber buttons Shuffle Play on all discs Playing Tracks RepeatedlyPlaying in Random Order Shuffle Play Repeating the current trackTo programme Repeat Steps To cancel Programme PlayCreating Your Own Programme Programme Play If you’ve made a mistakeChanging the track order Playing Using a Timer CDP-CA9ES onlyChecking the track order Fading In or Out Recording Your Own ProgrammeChanging the fading time Grouping Tracks Music Clip What You Can Do With the Custom FilesPlaying tracks in a clip Clip Play Labelling a Disc Disc MemoRemoving tracks from a clip Erasing the Disc Memo Storing Specific Tracks Delete BankErasing the Level File Playing using the Delete BankTo cancel playing using the Delete Bank Storing the Optimum Playback Level of a Disc Level FilePrecautions Specifications TroubleshootingIndex Propos de ce manuel BienvenuePour les utilisateurs au Canada Mémorisation d’informations sur les disques compacts PréparationLecture de disques compacts Enregistrement de disques compactsMettre le Power pourAvant de commencer… Appuyez surVue d’ensemble Introduisez les piles dans la télécommandeDéballage Raccordement du systèmeCâble optique non fourni Branchement du cordon d’alimentationTransport du lecteur RemarqueRemarques sur les indications de numéro de disque Utilisation de la fenêtre d’affichageInformations affichées pendant la lecture d’un disque Vérification de la durée résiduelleLocalisation d’un disque déterminé Remplacement des disques pendant la lecture d’un disquePour localiser Appuyez sur Touches numériques 10 -/± RM-D645 pour CDP-CA9ES Pour localiser AppuyezLecture aléatoire de tous les disques Lecture de plages répétéeLecture dans un ordre quelconque lecture aléatoire Répéter la lecture de la plage en coursPour programmer Si vous avez commis une erreurPour annuler la lecture programmée Le programme reste activé même à la fin de la lecture Lecture à l’aide d’un programmateur CDP-CA9ES uniquementVérification de l’ordre des plages Changer l’ordre des plagesEnregistrement de votre propre programme Fondu enchaîné d’entrée et de sortieModification du temps d’évanouissement Combien de disques pouvez-vous personnaliser? Grouper des plages clip musicalVous pouvez mémoriser les informations suivantes Où sont mémorisés les fichiers de lecture personnalisée?Supprimer des plages dans un clip Etiqueter un disque mémo de disqueMémoriser des plages dans un clip Lecture des plages d’un clip lecture de clipVous pouvez introduire des caractères non alphanumériques Mémorisation de plages déterminées suppression de blocSuppression d’un mémo de disque Annulation de la fonction de suppression de bloc Lecture avec la fonction de suppression de blocSuppression du niveau de lecture personnalisé Remarques sur les disques compacts PrécautionsSpécifications DépannageV, W, X, Y, Z Désignation des commandes TouchesCommande I, J, KAcerca de este manual ¡BienvenidoConvenciones Información adicional Procedimientos inicialesReproducción de discos compactos Grabación a partir de discos compactosPara detener la reproducción Pasos previos…Pulse Continue PulseDescripción general DesembalajeConexión del sistema Inserción de pilas en el mando a distanciaNota Conexión del cable de alimentaciónTransporte del reproductor ∙ Si dispone de un amplificador de potencia analógicoNotas sobre las indicaciones de número de disco Uso del visorVisualización de información mientras se reproduce un CD Comprobación del tiempo restanteSustitución de discos durante la reproducción de un disco Localización de un disco determinadoPara localizar Pulse Botones numéricos RM-D645 para CDP-CA9ES Reproducción aleatoria de un disco Reproducción repetida de temasRepetición del tema actual Reproducción aleatoria de todos los discosPara cancelar la reproducción del programa Si ha cometido un errorPara programar Repita los pasos Comprobación del orden de los temas Sólo para CDP-CA9ESReproducción con temporizador Cambio del orden de temasPara comprobar y cambiar el programa Grabación de un programa propioAparición y desaparición gradual del sonido Una pausa se contabiliza como un temaAgrupación de temas Separación musical Utilidad de los archivos personalizadosPara reproducir temas en otro clip Asignación de etiqueta a un disco Memo de discoReproducción de temas de un clip Reproducción de clips Extracción de temas de un clipEs posible introducir caracteres no alfanuméricos Almacenamiento de temas específicos Supresión de bancoSupresión del memo de disco Borrado de la supresión de banco Reproducción mediante la supresión de bancoSupresión del archivo de nivel Notas sobre discos compactos PrecaucionesEspecificaciones Solución de problemasIndice alfabético