Connecting
Connecting
This chapter describes how to install your Classik Movie System and how to connect it to speakers, TV etc.
NOTE:
In the manual ‘TV’ refers to projection TVs and monitors as well as televisions.
Unpacking
The Classik Movie System comes in a box with the following accessories:
●handset with booklet
●2 x R6 (AA) size batteries for the handset
●AM aerial
●FM aerial
●mains lead
●this manual
We recommend that you retain all packaging in case you need to transport the Classik Movie System at a later date.
Voltage selection
Do not connect the mains supply until you have verified that the Classik Movie System is set to the correct voltage for your mains supply.
The Classik Movie System is
This appliance must be earthed. Use the earthed moulded mains lead supplied. Never use an unearthed plug or adapter.
Positioning
You can position your Classik Movie System almost anywhere you find convenient, but please consider the following points:
●Allow at least 10cm of space to the sides, rear and above the Classik Movie System for air circulation.
●Never block the ventilation holes on the top and sides of the unit.
●The handset is sensitive. You should have no problems operating the Classik Movie System with the handset wherever it is placed in a room, provided you keep the Classik Movie System out of direct sunlight and you do not obscure the control window.
IMPORTANT:
Do not open the Classik Movie System’s disc drawer if the unit is behind glass doors as this can damage the drawer’s mechanism.
4