Linn Linn Classic Movie System manual Test Tone

Page 22

Setup Menus

FRONT POSN (position)

Calculate the approximate distance between your seating position and your front speakers.

Highlight the 5FT/1.5M option, then use the key on the front panel or handset to increase the distance shown (up to 30FT/9.2M).

Select the appropriate distance by pressing ‘enter’ on the front panel or handset.

CENTRE POSN (position)

Calculate the approximate distance between your seating position and your centre speaker.

Highlight the 5FT/1.5M option, then use the key on the front panel or handset to increase the distance shown (up to 30FT/9.2M).

Select the appropriate distance by pressing ‘enter’ on the front panel or handset.

REAR POSN (position)

Calculate the approximate distance between your viewing position and your rear speakers.

Highlight the 5FT/1.5M option, then use the key on the front panel or handset to increase the distance shown (up to 30FT/9.2M).

Select the appropriate distance by pressing ‘enter’ on the front panel or handset.

NOTES:

If you only use front speakers the above menus will not be available.

It is not necessary to add time delay to a subwoofer.

TEST TONE

When set to ON, a tone signal is sent to all speakers (except a subwoofer) starting with the front left and moving in a clockwise direction. The front panel display shows all possible speakers with the highlighted speaker indicating the current position of the tone.

The test tone has two functions:

Testing speaker connections

If a speaker has not been connected correctly, the tone will either not be heard or will jump to a speaker out of the clockwise sequence (meaning a speaker has been connected to the wrong outputs on the Classik Movie System). This feature is not available for the subwoofer.

Speaker volume trim

This feature can be used to ensure the volume level that reaches your seating position is the same for each speaker (for subwoofer adjustment- see Subwoofer trim adjustment in Operating Preamplifier chapter).

To perform volume trim:

●Set TEST TONE to ON. The test tone display appears on the Classik Movie System’s front panel.

●Wait for the test tone to reach the speaker you wish to adjust.

●Repeatedly press or hold / on the handset to trim the volume as required.* Volume trim range is -10 to +10, with neutral trim being 0.

A few seconds after the / key has been released, the test tone will continue its clockwise direction.

* You can do this by ear or by using a Sound Pressure Level meter.

16

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Page Important Safety Information Mains PlugsMains plug replacement This Appliance Must be EarthedCE Declaration of Conformity Date of issue Test typeFCC notice Copyright and Acknowledgements Contents Tuner Connect FeatureGuarantee and Service Technical Specification PreamplifierDiscs CleaningIntroduction Important Note Disc formatsVoltage selection ConnectingUnpacking PositioningTV Scart GND, AMVideo Mains InputTV input and output connectors Voltage selector VCR input and output connectorsBack panel US version Connecting to a TV European version Connecting the Classik Movie SystemConnecting the aerials Connecting to a mains supplyConnecting to a VCR European version Connecting to a TV US versionConnecting to a VCR US version Connecting to an external power amplifier Connecting to speakersConnecting to an analogue tape recorder Connecting to an auxiliary sourceFront panel Front Panel and HandsetDisc drawer Front panel display Handset Volume / volume + Adjust the volume levelHandset modes Setup Menus About the setup menusTV Display Exiting from the setup menusTV Type Captions Picture ModeAngle Mark Screen SaverCentre FrontSmall RearTest Tone Dynamic Audio OUTDual Mono PRO LogicAudio PasswordDefaults SubtitleFirst of all Playing DiscsFront panel display DVDs Basic operationTo play a disc CDsTo stop playback and remove a disc Locating titles/chapters/tracks on a discTo pause a disc Direct title selectionNext and previous chapter/track selection Using the front panelTo play a particular track Using the handset Direct chapter selectionFast scan forwards and backwards Locating a particular point on a discFast search forwards and backwards Fast SearchSlow search forwards and backwards Slow scan forwards and backwardsDirect time selection To repeat an entire disc or DVD title Using the handsetTo repeat a specific chapter/track Using the handset Repeat discIntro program Repeat sectionShuffle program Include programExclude program Using DVD menusTo clear a stored program or cancel exclude program mode Title/DVD menuAngle selection Further playback options for DVDsLanguage selection Zoom and panTo toggle between Midnight Movie mode on or off Midnight Movie modeAudio mode Speakers used Surround sound audio modesAM and FM band selection Tuning functionsTuner Frequency selectionUsing the front panel or handset Signal searchingSignal scanning To search for signals Using the handsetSignal mute level To adjust the signal mute levelAutomatic preset storage Preset functionsPreset storage To store a frequency as a preset Using the handsetPreset deletion Preset selectionAudio modes Preamplifier Volume and mutingVolume adjustment Mute and unmuteBalance adjustment Subwoofer trim adjustmentFader balance Bass adjustment Bass and treble adjustmentMaster balance To adjust the level of treble Treble adjustmentTo exit treble adjustment Record lock Record FunctionMaking a recording Listen and record sourcesSetting up a Connect system Connect FeatureAbout Connect Switching between Main Mode and Local Mode Party ModeMain Mode and Local Mode Controlling the driver unit from a receiver unitVolume control in Party Mode Restrictions to Party ModeParty Poop Programming the handset To enter TV modeTV Control Controlling the TVLanguage Codes Language CodeTo change the user options’ settings Using the front panel Changing the user options’ settingsUser Options Table of user options Technical support and information Guarantee and ServiceUSA General Technical SpecificationVideo Tuner Multi Room Page Page Pack
Top Page Image Contents