JBL 260 user manual Prog Change Mode Program List Prog Lock

Page 54

Section 5

 

 

 

 

DriveRack

 

 

 

®

 

 

Utilities/Meters

 

 

The procedure for setting up the program list is as follows.

•From Program mode, press the UTILITY button and use the PREV PG or NEXT PG buttons to move to the page that appears something like this:

Program List

 

List Size

10

List Index

1

Program 1

 

 

 

•Note that the arrow indicates the currently selected parameter for editing. To select parameters to edit from the current page, press the DATA wheel until the arrow is next to the parameter that you wish to edit.

•With List Size selected, rotate the DATA wheel to set the list size. List Size is the total number of programs that you need to select between; the selectable options are 1-10.

•Once the list size has been selected, press the DATA wheel. Rotate the DATA wheel to select Index 1, if it is not already selected. Press the DATA wheel in again to move down to the program selection parameter. Rotate the DATA wheel to select the program which you would like to appear first in your custom program list. Press the DATA wheel twice to move back to the List Index parameter and rotate the DATA wheel to set this to List Index number 2. Press the DATA wheel again, then rotate the DATA wheel to select which program you would like to appear second in your custom program list. Repeat this process for all programs which you want to appear in your custom program list.

•Once you are done creating your custom Program List you need to turn Program List Mode on. To do this press the NEXT PG button. The display will appear something like this:

Prog Change Mode

 

Program List

 

Prog Lock

24

•Turn the DATA wheel to change the Program Change Mode from ‘Normal’ to ‘Program List’.

•Once your program list has been built and Program Change Mode turned on, press the

PROGRAM/CONFIG button to exit.

•Now as you turn the DATA wheel, you should see only the programs which you assigned in your custom program list. If at any time you would like to set the Program List Mode back to normal, simply press the UTILITY button, go back to the ‘Prog Change Mode’ page and switch the mode from ‘Program List’ to ‘Normal’.

Note: The Program Lock parameter shown in the above screen shot allows you to prevent overwriting of certain User Programs. All program numbers from the set number and below will be locked and cannot be overwritten.

46

 

DriveRack® User Manual

 

 

Page 53 Page 55
Image 54
Page 53 Page 55
Contents DriveRack Important Safety Information Electromagnetic Compatibility Table of Contents DriveRackIntro DriveRack 260 Features IntroductionDefining the DriveRack 260 System Service Contact Info DriveRackIntroductionIntroductionDriveRack Warranty Section Getting Started Rear Panel Connections Getting Started Front Panel Getting Started Quick Start ConnectionsGetting Started Section DriveRack DriveRack DriveRack DriveRack DriveRack DriveRack Functions Editing Functions Basic Navigation Modes Effect Button Array OverviewEditing Functions Navigating the Pre-EQ -GEQ and PEQ Navigating the Crossover SectionEditing Functions Navigating the Other Section Navigating the Dynamics SectionEditing Functions Navigating the Delay Section Navigating the Utility/Meters SectionEditing Functions Navigating the Wizard Section Navigating the I/O SectionFunctions Navigating Factory Programs Configuration FunctionsProgram Definition Selecting ProgramsEditing Factory Programs Navigation ModesConfiguration Functions Saving Factory Program Changes Store Program ReplacingSelect Configuration Functions Creating a User ConfigurationSignal Path Link/UnlinkComp Select RouteSelect Link/Unlink Mono DLY 20 MS 810 ms Unused Select Link/UnlinkSaving Configuration Changes Route Name Output Ch2Detailed Detailed Parameters Pre-Crossover EQ 28 Band Graphic or 9-Band ParametricFeedback Eliminator Subharmonic Synthesizer Gate Detailed Parameters Automatic Gain Control AGC Detailed Parameters Notch Filters CrossoverPost-CROSSOVER PEQ Compressor/Limiter Gain G -20 to +20 dB Threshold T -40 to +20dBuRatio R 1.0 to Inf1 Auto On/OffHold 0 to 500 m Sec per band or global Limiter On/OffAttack .01 to 200 m Sec per band or global Release 360 to 5 dB / Sec per band or globalAlignment Delay Input RoutingOutput Meters LCD Contrast / Auto EQ Plot Utility LCD Contrast Auto EQ PlotUtilities/Meters PUP Program/MutePower Up Modes PUP Program Stored PUP Mute Current ZC Setup PanelZC Setup Output Panel ZC-2 BoostCut Panel 1 ZC-3 Select a No ChangePanel ZC-4 Switch 1 2 3 No Change Set Security Level Pre EQ LowSecurity Password Edit High Password Edit Med Password Press Store to ChangePassword Enter Password Set 260 Device Level HighProgram List/Program Change Prog Change Mode Program List Prog Lock Program ListZone Controllers Panel INS a Comp o+LIM 0+ Output Trims NetPage Control Remote Control DriveWare PC Software GUISection Basic Operation DriveRack Remote Control ZC-Zone Controllers Zone Controller InstallationZC-1 & ZC-2 Zone Controller Wiring Section Diagram a Diagram B Diagram C Guide Hardware Application GuideMono 4-Way w/ Two Aux Zones SoftwareApplication Guide Stereo Tri-amp Application Guide Stereo w/ four Aux Zones Application Guide Stereo Bi-amp w/ Dual Delay Page DriveRackAppendix Appendix Factory Reset Power Up Quick Key OptionsAppendix Specifications Analog InputsAdjust Crossover Output Gains gain structure Appendix Auto EQ Optimization TipsLook out for Modes Appendix Crossover Diagrams Appendix Program List/ Speaker Tunings/ Power Amp Tunings Main Speakers Power AmplifiersProgram List Appendix Block Diagram DriveRackAppendix aAppendix Input and Output Diagrams System Setup and Gain Structure Appendix Gain Level JumpersAppendix

260 specifications

The JBL 260 is a powerful and versatile loudspeaker that embodies the brand's renowned commitment to audio excellence. Known for its striking design and rich sound quality, the JBL 260 caters to both audiophiles and casual listeners alike, ensuring an immersive listening experience in any environment.

One of the standout features of the JBL 260 is its high-efficiency design, which allows it to deliver exceptional sound performance even in larger spaces. The speaker is equipped with a robust 6.5-inch woofer that provides deep, resonant bass, while a 1-inch soft dome tweeter ensures clear and detailed high frequencies. This combination results in a balanced sound signature that captures the subtle nuances of various music genres.

The JBL 260 employs advanced technologies such as Harman's proprietary Polished Surface Com Acoustic Design, which minimizes cabinet vibrations and resonances. This technology contributes to the overall clarity of the audio output, allowing for a more natural soundstage. Additionally, the Waveguide technology used in the speaker enhances the dispersion of sound throughout the room, ensuring that listeners can enjoy a consistent audio quality, regardless of their position.

Connectivity is another area where the JBL 260 excels. The speaker includes versatile connection options, such as Bluetooth, allowing users to stream music wirelessly from smartphones, tablets, or computers. This makes it incredibly easy to integrate the JBL 260 into modern home entertainment systems. With a range of inputs, including RCA and auxiliary ports, the speaker can accommodate various audio sources, making it a great choice for both casual listening and serious audio setups.

The design of the JBL 260 is both sleek and functional, with a modern aesthetic that fits seamlessly into any décor. Its sturdy construction not only contributes to its durability but also enhances sound quality by minimizing unwanted distortions. The speaker is available in various finishes, allowing users to choose a model that best suits their personal style.

In summary, the JBL 260 is a feature-rich loudspeaker that brings together advanced sound technologies, versatile connectivity options, and an attractive design. It stands out as an ideal choice for anyone seeking to elevate their audio experience, making it a solid investment for years to come.
Top Page Image Contents