EZQuest DVD Duplication user manual Detect Drives Copy

Page 4

Detect Drives

1. Copy

There are 12 functions for you to use. Function 1 is Copy. You can press t to select other functions.

λPlace a source DVD into DVD-ROM.

λ	Switch to function 1 Copy by pressing s . Place blank DVD disks into the
	DVD writers, and press ENT to start copying.

λWhen copying comes to an end, the passed DVDs will eject automatically. The default is eject automatically, but you can change it.

λThe failed DVDs will remain in the writers. The default is keeping failed DVDs in the writers, but you can change it. To take the failed DVDs you need to press the ìejectî buttons on the writers.

Page 4

Image 4

Contents EZQuest Duplicators Copyright and Trademark EZQuest Buttons and LCDDVD Duplicator 1-3 ver 2.03K Initialize Sdram Detect Drives Copy Copy Copying- DVD 0% 4213.4MB d2015Test Copy OKTest Erasing discTesting- DVD 0% 4213.4MB d2015 Test & CopyTest OK Test & CopyVerify Test & Copy OKVerify Verify- DVD 0% 4213.4MBCompare Verify OKCompare Compare- DVD 0% 4213.4MBPrescan Src 01 DVD-ROM Total 4213.4MBSrc 02 DVD-RW Identical Src 02 DVD-RW TOC not matchDisc Info Scaning- DVD 0% 4213.4MBPreScan OK Disc InfoSelect Source Select SourceSrc DVD-ROM 01 IDE1 Master DVD-ROM selectedImage ImageLoad Image LoadImage load OK Image Exists Overwrite?YesDelete Image Image P a Delete ImagePartition a Image is deleted Image InfoImage Image Info Compare ImageTgt 00 HDD P a Identical Tgt 00 HDD P a TOC not matchSelect Partition Image P a Select PartitionSelect Working Partition a Set Partition toEdit Track for CD only Image Image Src DriveSelect Img Src Load image from Drive ID-01Edit Track CD to CDEdit Track CD to CD Edit Select Track 1/10Select Track End 1Trk0325 End edit disc and burn?YesCopying- 24X Edit 1/10 1/1 Burn CompleteContinue edit next Disc?Yes Insert next discSelect Track +2/10 Select Track End 1Trk0425Copying- 24X Edit 2/10 2/2 Continue edit next Disc?NoClose all discís session? Yes Closing Session Please waitCD to HDD Edit Track CD to HDD EditLoad- P0 -24X Edit 1/10 1/1 Continue edit next Disc?Yes Burn or Move to partition?Burn Load- P0 -24X Edit 2/10 2/2Copy- P0 -24X 0% Trk0325 Moving to P a 0% Burn or Move to partition? MoveMoving to P a Play Audio Track Edit Track Play Audio TrackClose Session Playing Track-1 0000Edit Track Close Session Setup SetupClosing Complete Fail Setup Language Setup Burn SpeedLanguage English Burn Speed MaximumSetup Read Speed Setup Auto Start DriveRead Speed Maximum Auto Start Drive OffSetup Startup Menu Setup Auto VerifyStartup Menu 1.Copy Auto Verify OffSetup Auto Compare Setup Auto PrescanAuto Compare Off Auto Prescan OffSetup Eject Disc Setup Burn On The FlyEject Disc Eject Disc Eject Good OnlySetup Burn Mode Burn ModeNo Valid HDD Setup Button Sound Setup Device InfoButton Sound Device InfoSetup System Info DVD-ROM DVD-116DVD-RW DVR-103 System InfoAdv Setup Adv SetupAdv Setup UnderRun Protect UnderRun ProtectAdv Setup Overburn Adv Setup Read Error SkipRead Error Skip Off Overburn OffAdv Setup Format HDD Adv Setup Verify HDDAll data will be lost, format? Yes There is no HDDAdv Setup Burn-in Verify Disk or Partition? DiskVerify Hard Disk Burn-inUpdate Firmware Adv Setup Update FirmwareSel burn-in num Run Continuous Burn-in Erase&CopyAdv Setup Compare Firmware 12.9 H/W DiagnosticAdv Setup Diagnostic Searching F/WLoad Default Adv Setup Load DefaultLoad Default Config? Yes ≠ ↓ Enter ESC Holde ESC to exit12.11 CD+G Adv Setup CD+GIsrc About LCD About Error MessagesAbout DVD-ROM/DVD Writers About Firmware Update About ButtonsAbout DVD Writer Not Readable About High Failure RateAbout Function 12 and Cancellation Appendix 1 List of Functions Adv Setup Appendix LCD Messages Normal ConditionsConnecting with a HDD Verify Disk or Partition?Firmware Update Audio EditingFirmware is updated successfully