EZQuest DVD Duplication Searching F/W, Adv Setup Compare Firmware, 12.9 H/W Diagnostic

Page 44

You can get the newest firmware version from ACARD by e-mail, or download it directly from the web site: http://www.acard.comThen, unzip the file ìcdxxx.binî and copy it into a blank DVD.

After placing the DVD on the DVD-ROM , press ENT . The system will begin searching the new firmware and show the message on LCD as follows after it finds the new firmware. Then press ENT to update.

Searching F/W---

XXX/XXXXX

5.12.8Compare Firmware

On the above figure press ESC and t to enter the following figure.Compare Firmware is to compare the current firmware version and the newly downloaded version. It can prove if the downloaded version is the newest one.

12-08. Adv Setup

Compare Firmware

5.12.9 H/W Diagnostic

Press ESC and t to enter the next figure. H/W Diagnostic is to test the system.

12-09. Adv Setup

H/W Diagnostic

Page 44

Image 44

Contents EZQuest Duplicators Copyright and Trademark DVD Duplicator 1-3 ver 2.03K Initialize Sdram Buttons and LCDEZQuest Detect Drives Copy Copy Copying- DVD 0% 4213.4MB d2015Test Copy OKTest Erasing discTesting- DVD 0% 4213.4MB d2015 Test & CopyTest OK Test & CopyVerify Test & Copy OKVerify Verify- DVD 0% 4213.4MBCompare Verify OKCompare Compare- DVD 0% 4213.4MBPrescan Src 01 DVD-ROM Total 4213.4MBSrc 02 DVD-RW Identical Src 02 DVD-RW TOC not matchDisc Info Scaning- DVD 0% 4213.4MBPreScan OK Disc InfoSelect Source Select SourceSrc DVD-ROM 01 IDE1 Master DVD-ROM selectedImage ImageLoad Image LoadImage load OK Image Exists Overwrite?YesDelete Image Image P a Delete ImagePartition a Image is deleted Image InfoImage Image Info Compare ImageTgt 00 HDD P a Identical Tgt 00 HDD P a TOC not matchSelect Partition Image P a Select PartitionSelect Working Partition a Set Partition toEdit Track for CD only Image Image Src DriveSelect Img Src Load image from Drive ID-01Edit Track CD to CDEdit Track CD to CD Edit Select Track 1/10Select Track End 1Trk0325 End edit disc and burn?YesCopying- 24X Edit 1/10 1/1 Burn CompleteContinue edit next Disc?Yes Insert next discSelect Track +2/10 Select Track End 1Trk0425Copying- 24X Edit 2/10 2/2 Continue edit next Disc?NoClose all discís session? Yes Closing Session Please waitCD to HDD Edit Track CD to HDD EditLoad- P0 -24X Edit 1/10 1/1 Continue edit next Disc?Yes Copy- P0 -24X 0% Trk0325 Load- P0 -24X Edit 2/10 2/2Burn or Move to partition?Burn Moving to P a Burn or Move to partition? MoveMoving to P a 0% Play Audio Track Edit Track Play Audio TrackEdit Track Close Session Playing Track-1 0000Close Session Closing Complete Fail SetupSetup Setup Language Setup Burn SpeedLanguage English Burn Speed MaximumSetup Read Speed Setup Auto Start DriveRead Speed Maximum Auto Start Drive OffSetup Startup Menu Setup Auto VerifyStartup Menu 1.Copy Auto Verify OffSetup Auto Compare Setup Auto PrescanAuto Compare Off Auto Prescan OffSetup Eject Disc Setup Burn On The FlyEject Disc Eject Disc Eject Good OnlyNo Valid HDD Burn ModeSetup Burn Mode Setup Button Sound Setup Device InfoButton Sound Device InfoSetup System Info DVD-ROM DVD-116DVD-RW DVR-103 System InfoAdv Setup Adv SetupAdv Setup UnderRun Protect UnderRun ProtectAdv Setup Overburn Adv Setup Read Error SkipRead Error Skip Off Overburn OffAdv Setup Format HDD Adv Setup Verify HDDAll data will be lost, format? Yes There is no HDDAdv Setup Burn-in Verify Disk or Partition? DiskVerify Hard Disk Burn-inUpdate Firmware Adv Setup Update FirmwareSel burn-in num Run Continuous Burn-in Erase&CopyAdv Setup Compare Firmware 12.9 H/W DiagnosticAdv Setup Diagnostic Searching F/WLoad Default Adv Setup Load DefaultLoad Default Config? Yes ≠ ↓ Enter ESC Holde ESC to exitIsrc Adv Setup CD+G12.11 CD+G About DVD-ROM/DVD Writers About Error MessagesAbout LCD About Firmware Update About ButtonsAbout DVD Writer Not Readable About High Failure RateAbout Function 12 and Cancellation Appendix 1 List of Functions Adv Setup Appendix LCD Messages Normal ConditionsConnecting with a HDD Verify Disk or Partition?Firmware Update Audio EditingFirmware is updated successfully