EZQuest DVD Duplication user manual Test & Copy, Testing- DVD 0% 4213.4MB d2015, Test OK

Page 7

LCD will show the testing information as follows.

Testing- DVD 0% 4213.4MB d:20:15

When the test comes to an end, LCD will show the results as follows.

2.Test OK: 03

Stopping the test halfway does not affect the DVD disks, but if the DVD-rewriteable disks contain important data, they may be destroyed.

5.3 Test & Copy

Function 3 Test & Copy is to test first and then copy actually.

Select function 3. Put a source DVD onto DVD-ROM and blank DVD disks onto the DVD writers.

3.Test & Copy

Press ENT to start simulation. LCD will show the testing information as follows.

Testing- DVD 0% 4213.4MB d:20:15

Page 7

Image 7

Contents EZQuest Duplicators Copyright and Trademark EZQuest Buttons and LCDDVD Duplicator 1-3 ver 2.03K Initialize Sdram Detect Drives Copy Copying- DVD 0% 4213.4MB d2015 CopyErasing disc TestCopy OK TestTest & Copy Testing- DVD 0% 4213.4MB d2015Test & Copy Test OKVerify- DVD 0% 4213.4MB VerifyTest & Copy OK VerifyCompare- DVD 0% 4213.4MB CompareVerify OK CompareSrc 02 DVD-RW TOC not match PrescanSrc 01 DVD-ROM Total 4213.4MB Src 02 DVD-RW IdenticalDisc Info Disc InfoScaning- DVD 0% 4213.4MB PreScan OKDVD-ROM selected Select SourceSelect Source Src DVD-ROM 01 IDE1 MasterImage Load ImageImage LoadImage P a Delete Image Image load OKImage Exists Overwrite?Yes Delete ImageCompare Image Partition a Image is deletedImage Info Image Image InfoTgt 00 HDD P a TOC not match Tgt 00 HDD P a IdenticalSet Partition to Select PartitionImage P a Select Partition Select Working Partition aLoad image from Drive ID-01 Edit Track for CD onlyImage Image Src Drive Select Img SrcSelect Track 1/10 Edit TrackCD to CD Edit Track CD to CD EditBurn Complete Select Track End 1Trk0325End edit disc and burn?Yes Copying- 24X Edit 1/10 1/1Select Track End 1Trk0425 Continue edit next Disc?YesInsert next disc Select Track +2/10Continue edit next Disc?No Copying- 24X Edit 2/10 2/2Edit Track CD to HDD Edit Close all discís session? YesClosing Session Please wait CD to HDDLoad- P0 -24X Edit 1/10 1/1 Continue edit next Disc?Yes Burn or Move to partition?Burn Load- P0 -24X Edit 2/10 2/2Copy- P0 -24X 0% Trk0325 Moving to P a 0% Burn or Move to partition? MoveMoving to P a Edit Track Play Audio Track Play Audio TrackClose Session Playing Track-1 0000Edit Track Close Session Setup SetupClosing Complete Fail Burn Speed Maximum Setup LanguageSetup Burn Speed Language EnglishAuto Start Drive Off Setup Read SpeedSetup Auto Start Drive Read Speed MaximumAuto Verify Off Setup Startup MenuSetup Auto Verify Startup Menu 1.CopyAuto Prescan Off Setup Auto CompareSetup Auto Prescan Auto Compare OffEject Disc Eject Good Only Setup Eject DiscSetup Burn On The Fly Eject DiscSetup Burn Mode Burn ModeNo Valid HDD Device Info Setup Button SoundSetup Device Info Button SoundSystem Info Setup System InfoDVD-ROM DVD-116 DVD-RW DVR-103UnderRun Protect Adv SetupAdv Setup Adv Setup UnderRun ProtectOverburn Off Adv Setup OverburnAdv Setup Read Error Skip Read Error Skip OffThere is no HDD Adv Setup Format HDDAdv Setup Verify HDD All data will be lost, format? YesBurn-in Adv Setup Burn-inVerify Disk or Partition? Disk Verify Hard DiskBurn-in Erase&Copy Update FirmwareAdv Setup Update Firmware Sel burn-in num Run ContinuousSearching F/W Adv Setup Compare Firmware12.9 H/W Diagnostic Adv Setup Diagnostic≠ ↓ Enter ESC Holde ESC to exit Load DefaultAdv Setup Load Default Load Default Config? Yes12.11 CD+G Adv Setup CD+GIsrc About LCD About Error MessagesAbout DVD-ROM/DVD Writers About High Failure Rate About Firmware UpdateAbout Buttons About DVD Writer Not ReadableAbout Function 12 and Cancellation Appendix 1 List of Functions Adv Setup Normal Conditions Appendix LCD MessagesVerify Disk or Partition? Connecting with a HDDAudio Editing Firmware UpdateFirmware is updated successfully