Integra DPS-7.3 instruction manual Connecting to a TV, Making component video connections

Connecting

Connecting to a TV

Before connecting

• Refer also to the instruction manual of the TV. • Connect the plugs securely.

•When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections.

•Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

•When this DVD player is connected to a TV compatible with progressive signal using the VIDEO OUTPUT COMPONENT jacks, the video output to “Progressive” (see page 48) will produce a higher quality picture.

Incomplete

Insert completely

Making component video connections

If the TV or monitor has component video inputs, making this type of video connection will produce the ideal picture quality for the presentation of DVD-Video. Using a component video cable (sold separately), connect the VIDEO OUTPUT COMPONENT CH 1 or CH 2 jacks to the corresponding component video input jacks on the TV. Actual labels for component video inputs may vary depending on the TV manufacturer. (e.g. Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

By making connections to a stereo system, you can improve the quality of the sound. Using an audio cable (not supplied), make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding jacks on the stereo component.

: Signal flow

BE sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 17 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 41.

Component video cable

To component video input

Stereo audio connection cable

To audio input

L (White)

R (Red)

IRRS-232

OUT AC INLET

IN

VIDEO OUTPUT ANALOG OUTPUT DIGITAL OUTPUT

Y	PB	PR	VIDEO	CH 1	CH 2 FRONT SURR CENTER	REMOTE
					OPTICAL	CONTROL
				L		COAXIAL
CH1
CH2				R
	COMPONENT		S VIDEO		SUB
					WOOFER

DVD AUDIO/VIDEO PLAYER

MODEL NO. DPS-7.3

DO NOT connect the mains lead at this time.

Jacks for video	Jacks for audio
connections	connections

Making S-video connections

If the TV or monitor has an S video input, make the S video connection. The S video connection will provide higher quality picture playback.

By making connections to a stereo system, you can improve the quality of the sound. Using an audio cable (not supplied), make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding jacks on the stereo component.

Note

•If the TV audio is monaural, leave the red plug disconnected.

Stereo audio connection cable

To audio input

R (Red)

L (White)

S video connection cable

To S video input

13