Integra DPS-7.3 Adjusting Audio and Video Settings, Using the Setup Screen Menus

Function Setup

Adjusting Audio and Video Settings

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

Using the Setup Screen Menus

1	ON	Press ON (Standby/On on the front
		panel).

2	SETUP	Press SETUP.
		The Setup screen appears.

Example
Audio1 A2 Video1 V2 Language	General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS Out — DTS 3PCM
Linear PCM Out — Down Sample On
MPEG Out — MPEG 3PCM
Setup audio
Digital output format/tone adjust
Move	SETUP	Exit

3		Use the cursor buttons (2/3) to
		select the menu you want.
		As each menu is selected with the cursor,
		the settings appear below the menu
		heading.
4		Use the cursor buttons (∞) to enter
		the menu.
		The top item within the menu becomes
		highlighted.
	Example
		Audio1	A2	Video1	V2	Language	General
				Audio DRC — Off
			Dolby Digital Out			Dolby Digital
				DTS Out		Dolby Digital 3 PCM
			Linear PCM Out — Down Sample On
				MPEG Out — MPEG 3PCM
		Change Dolby Digital output mode
			Move				SETUP Exit
5		Use the cursor buttons (5/∞) to
		select the setting you want to

change.

The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.

6	Use the cursor buttons (3)			to enter
	the setting options.
	Example
	Audio1 A2 Video1 V2	Language General
	Audio DRC	— Off
	Dolby Digital Out	Dolby Digital
	DTS Out	Dolby Digital 3 PCM
	Linear PCM Out	— Down Sample On
	MPEG Out — MPEG 3PCM
	Output Dolby Digital
	Move	ENTER Select SETUP	Exit

•Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press 7 first before pressing SETUP.

•Operating the menu after pressing 7 may cancel the resume function.

•Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

7		Use the cursor buttons (5/∞) to
		select a new setting and press
		ENTER to set the new setting in
	ENTER	memory.
		Press RETURN or the cursor button (2) to
		exit the options without making any
		changes.
8	RETURN	Press RETURN or the cursor button
		(2) to go back to the main menu bar

to select another menu.

9		SETUP
			Press SETUP to close the Setup
			screen.
			The Setup screen closes.
Notes
•	If you	turn off the DVD player during setup, the settings are
	canceled. Press SETUP to finish the setup.
•	The memorized resume position may be erased by setup.			41
•	The Setup screen always shows the latest settings.