Samsung SV-DVD54T instruction manual Clearing a Preset Station, Changing the Preset Station Table

Page 14

Clearing a Preset Station

☛If you have stored a TV station:

◆That you do not require

◆At the wrong programme position

you can cancel it.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding	,❷ buttons to select
the Install option.

3Press the OK or ❿ to select this option. Result: The Install menu is displayed.

Install

Auto Setup

Manual Setup

38

4 Press the corresponding or❷ buttons, until the Manual Setup option is selected.

5Press the OK or ❿ to select a Manual Setup option. Result: The TV STATION TABLE menu is displayed.

TV STATION TABLE

PR CH NAME

1

2

3

4

5

SWAPPING : OK

DELETE : CLEARRETURN

6 Press the corresponding or❷buttons, until the required preset TV station (PR) is selected.

7Press the CLEAR button.

8Repeat the same procedure from Step 6 onwards until all the required stations have been cleared.

9On completion, press the RETURN button four times to exit the menu.

Changing the Preset Station Table

You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding	,❷ buttons to select
the Install option.

3Press the OK or ❿ buttons to select this option. Result: The Install menu is displayed.

Install

Auto Setup

Manual Setup

38

4 Press the corresponding or❷ buttons, until the Manual Setup option is selected.

5Press the OK or ❿ button to select this option. Result: The TV STATION TABLE menu is displayed.

		TV STATION TABLE
	PR	CH	NAME
	1	27	- - - -
2
3
4
5
			SWAPPING :
			SWAPPING :		OK
	DELETE :	CLEAR		RETURN

			TV STATION TABLE
	PR	CH	NAME
1
2

	3	27	- - - -
4
5

SWAPPING : OK

DELETE : CLEARRETURN

6 Press the corresponding or❷ buttons, until the required preset TV programme is selected. Result: The selected station is displayed at the

same time on the television screen.

7To change the programme number assigned to a station press the OK button on the remote control. (For example, To move a TV station in programme 1 to programme 3)

8Press the or❷ buttons to select required position. And then press OK again to swap the position.

9On completion, press the RETURN button four times to exit the menu.

ENG-13

Image 14

Contents SV-DVD54T Remote Control Overview Contents DVD Functions Solving Problems STB FunctionsSafety Instructions Following illustrations represent precautionsDisc Type and Characteristics CharacteristicsRear View of the STB-DVD-VCR AccessoriesFront View of the STB-DVD-VCR DVD Deck is active DVD, CD is loaded Display IndicatorsInserting Batteries in the Remote Control Use same types of batteriesPlug & Auto Set up Select the required language by pressing Or ❷ buttonsTuning Your Television for Switch on the televisionSelect Language Setting the Date and Time Setting the Menu LanguageOpen Menu Presetting the Stations Automatically Install optionPresetting the Stations Manually Install optionPress the Clear button Clearing a Preset StationChanging the Preset Station Table Same time on the television screenCH28 .. CH38 .. CH69 Selecting the Colour ModeChannel Black and WhiteIntelligent Picture Control On completion, press Return three times to exit the menuAuto Power off Screen Messages Auto Power Off option is selectedProtecting a Recorded Cassette Selecting the Cassette TypeRepeat Play Hold the REC button down for a while to start recording Recording a Programme ImmediatelyRecording a Programme with Automatic Stop Up to six programmes can be preset Using the G-CODE FeatureBefore presetting your STB-DVD-VCR Check that the date and time are correctModifying G-code Programming If you wish to ThenYou can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording If you have forgotten which programmes will be recordedSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence at Variable Speeds Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame You can play a cassette in slow motionEnd Search Searching for a Specific SequenceGo To 00000 Stop Intro ScanIndex Skip Search Using the Tape CounterTo cancel an Index search simply press the ❿II or button Tape counterConnecting an RCA Audio/Video Input Cable Recording from Another VCR or CamcorderUsing the TV Buttons on the Remote Control With the unit in Stop mode, press the Menu button Choosing a ConnectionDigital Press the ,❷ buttons to select English Setting Up the Language FeaturesOK or ❿button RecordedMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionBlack Level Setting Up the Display OptionsTV Aspect Ntsc Disc OutputUse ,❷ to select Change Password Setting Up the Parental ControlAbout the Change Password There are up to 8 rating levels on a discReceiver Connections Special Playback Features Before You BeginIf you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVTo make the screen disappear, press the INFO. button again Using the Display FunctionWhen Playing a DVD/CD Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Repeat Play Selecting the Audio Language When playing a DVDUsing the Audio button Recalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD Clearing a MarkYour MP3 or WMA files should be ISO 9660 or Joliet format MP3/WMA Play Picture CD PlaybackCD-R MP3/WMA discs Return to the Album ScreenCD-R Jpeg Discs Seconds, the menu will disappearSTB Function Main Menu Volume ControlTo control the volume level Select SoundtrackProgramme Information Select VideotrackSelect Favorites SubtitleTo change the Teletext VBI InstallationTeletext VBI Use the ,❷ keys to select a Teletext VBI you wantAt the request window This cause your previous settings to be deletedChannel Organising Select a channel list to delete with ,❷ or ❿❿ keys Parental LockTo delete channels from Favorite Group Press the INFO. key again in order to cancel the lock Parental Lock System SetupTo cancel the lock This will take you to the following menuInput Technical Specifications VCR / DVDGeneral OutputRF Input Technical Specifications STBDemodulator Troubleshooting Guide VCR Problem Explanation/SolutionProblem Action Troubleshooting Guide DVDBefore requesting service troubleshooting Channel data Or Manual scanning menu Does not exist Troubleshooting Guide STBProblem Possible cause Solution of the problem AK68-00467C