Samsung SV-DVD54T instruction manual Intelligent Picture Control

Page 16

Intelligent Picture Control		G-CODE Extend

The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences.

1During playback, press the MENU button on the remote control.

Result: The Setup menu is displayed.

2Press the OK or ❿.

Result: The Setup menu is displayed.

3 Press the corresponding ,❷ buttons to select the User Set option.

4Press the OK or ❿ buttons to select this option. Result: The User Set menu is displayed.

						User Set
			Colour System		: Auto
			Colour System		: Auto					On
				IPC	: On					Off
			G-Code Extend		: Off					Off
			G-Code Extend		: Off

5 Press the corresponding or❷ buttons, until the IPC option is selected.

6Press the OK or ❿ buttons to select the IPC (intelligent picture control) option.

➢When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically.

7To adjust the sharpness manually, press the ❷ button to turn the IPC mode OFF.

8Press the ➛ or ❿ buttons until the picture is displayed according to your preferences.

➢If you do not press a button within ten seconds, the PICTURE menu disappears automatically.

9On completion, press RETURN three times to exit the menu.

➢You can use the IPC function with ease by using the ANGLE key on the REMOCON.

To prevent delays or over-runs the STB-DVD-VCR has a function called G-CODE EXTEND allowing you to extend the recording time by up to 60 minutes.

1After pressing the MENU, press the OK or ❿.

2 Press the corresponding ,❷ buttons to select the User Set option.

3Press the OK or ❿ buttons to select this option. Result: The User Set menu is displayed.

					User Set
		Colour System		: Auto
							Off
							Off
		IPC		: On			10
			G-Code Extend	: Off			20
							30
							40
							50
							60

4 Press the corresponding ,❷ buttons, until the G-Code Extend option is selected.

5Press the OK or ❿ buttons to set the G-Code Extend time by increments of 10 minutes.

6To turn off, press OK or ❿ buttons repeatedly until Off shows.

ENG-15

Image 16

Contents SV-DVD54T Remote Control Overview Contents DVD Functions Solving Problems STB FunctionsSafety Instructions Following illustrations represent precautionsDisc Type and Characteristics CharacteristicsFront View of the STB-DVD-VCR AccessoriesRear View of the STB-DVD-VCR Display Indicators Inserting Batteries in the Remote ControlDVD Deck is active DVD, CD is loaded Use same types of batteriesPlug & Auto Set up Select the required language by pressing Or ❷ buttonsTuning Your Television for Switch on the televisionOpen Menu Setting the Date and Time Setting the Menu LanguageSelect Language Presetting the Stations Automatically Install optionPresetting the Stations Manually Install optionClearing a Preset Station Changing the Preset Station TablePress the Clear button Same time on the television screenSelecting the Colour Mode ChannelCH28 .. CH38 .. CH69 Black and WhiteIntelligent Picture Control On completion, press Return three times to exit the menuAuto Power off Screen Messages Auto Power Off option is selectedRepeat Play Selecting the Cassette TypeProtecting a Recorded Cassette Recording a Programme with Automatic Stop Recording a Programme ImmediatelyHold the REC button down for a while to start recording Using the G-CODE Feature Before presetting your STB-DVD-VCRUp to six programmes can be preset Check that the date and time are correctModifying G-code Programming If you wish to ThenUsing the Timer Programming Feature Checking a Preset RecordingYou can check your preset recordings If you have forgotten which programmes will be recordedCancelling a Preset Recording Adjusting Picture Alignment ManuallySelecting the Audio Output Mode Playing a CassettePlaying a Cassette in Slow Motion Playing a Sequence Frame by FramePlaying a Sequence at Variable Speeds You can play a cassette in slow motionSearching for a Specific Sequence Go To 00000 StopEnd Search Intro ScanUsing the Tape Counter To cancel an Index search simply press the ❿II or buttonIndex Skip Search Tape counterConnecting an RCA Audio/Video Input Cable Recording from Another VCR or CamcorderUsing the TV Buttons on the Remote Control Digital Choosing a ConnectionWith the unit in Stop mode, press the Menu button Setting Up the Language Features OK or ❿buttonPress the ,❷ buttons to select English RecordedSetting Up the Audio Options Dolby Digital OutMPEG-2 Digital Out Dynamic CompressionSetting Up the Display Options TV AspectBlack Level Ntsc Disc OutputSetting Up the Parental Control About the Change PasswordUse ,❷ to select Change Password There are up to 8 rating levels on a discReceiver Connections Special Playback Features Before You BeginAdjusting the Aspect Ratio EZ View To play back using aspect ratio DVDIf you are using a 169 TV If you are using a 43 TVWhen Playing a DVD/CD Using the Display FunctionTo make the screen disappear, press the INFO. button again Using the Subtitle button Using the Angle buttonChanging the Camera Angle Using the Audio button When playing a DVDRepeat Play Selecting the Audio Language Using the Mark Function MP3/WMA Play Using the Mark Function DVDRecalling a Marked Scene Clearing a MarkMP3/WMA Play Picture CD Playback CD-R MP3/WMA discsYour MP3 or WMA files should be ISO 9660 or Joliet format Return to the Album ScreenCD-R Jpeg Discs Seconds, the menu will disappearVolume Control To control the volume levelSTB Function Main Menu Select SoundtrackSelect Videotrack Select FavoritesProgramme Information SubtitleInstallation Teletext VBITo change the Teletext VBI Use the ,❷ keys to select a Teletext VBI you wantChannel Organising This cause your previous settings to be deletedAt the request window To delete channels from Favorite Group Parental LockSelect a channel list to delete with ,❷ or ❿❿ keys Parental Lock System Setup To cancel the lockPress the INFO. key again in order to cancel the lock This will take you to the following menuTechnical Specifications VCR / DVD GeneralInput OutputDemodulator Technical Specifications STBRF Input Troubleshooting Guide VCR Problem Explanation/SolutionBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action Problem Possible cause Solution of the problem Troubleshooting Guide STBChannel data Or Manual scanning menu Does not exist AK68-00467C