Troubleshooting Guide (STB)
In some region, the digital terrestrial signal may be weak.So you’d better use the antenna in which the booster was built, for watching the weak sinal channels.
You can download and upgrade the system software of the receiver through a specific channel through a specific channel designated by the broadcaster.The Distributor will provide you with more information about that.
Problem | Possible cause | Solution of the problem |
|
|
|
No pictures on the screen | Receiver in Standby mode; | Set receiver to “On”; |
| Scart not connected tightly | Check connection and correct; |
| to video output of television; |
|
| incorrect channel or video | Check channel and video output and |
| output selected on television | correct (TV instruction manual) |
|
|
|
No sound | Audio cord connected | Check connection and correct; |
| incorrectly; |
|
| Loudness level = 0; | Increase loudness on television set; |
| Muting active | Press the MUTE key |
|
|
|
Remote Control does not | incorrect operation; | Point remote control |
operate directly |
| towards the Receiver. |
| Batteries dead or inserted | Replace batteries or insert correctly |
| incorrectly |
|
|
|
|
Poor picture quality | Signal strength too low | Check the signal strength in |
|
| the “Auto Scanning” menu, correct |
|
| alignmenta of your antenna |
|
|
|
Antenna cable not connected | Check connection and correct; | |
“Searching for signal” | or not tight; |
|
| incorrect position of the | Check position and correct, |
| antenna; | Check the signal strength in |
|
| the “Auto Scanning” menu |
|
|
|
Rereiver not yet set | Scanning of in “Automatic scanning” | |
“Channel data |
| or “Manual scanning” menu |
does not exist.” |
|
|
|
|
|
Disposal
The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of with household refuse.
Please obtain appropriate information about the regulations in your community,
and dispose of all refuse in accordance with regulations at the separate locations provided.