Samsung SV-DVD54T Cancelling a Preset Recording, Playing a Cassette, OptionDescription

Page 23

Cancelling a Preset Recording

You can cancel any programmes that are:

Incorrect

No longer required

1Press TIMER on the remote control. Result: The timer selection is displayed.

2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is

displayed.

3Select the programme to be cancelled by pressing

the

orbuttons.

4Press the CLEAR button to cancel the selected programme.

Result: All the recording information is deleted and

the broadcast will not be recorded.

5On completion, press RETURN twice.

Playing a Cassette

This function allows you to play back any pre-recorded cassette.

1Switch on both the television and your STB-DVD- VCR.

2Insert the video cassette to be played. If the safety tab on the cassette is intact, press ll. Otherwise, the cassette is played automatically.

When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking).

When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically.

NTSC tapes can be played back but cannot be recorded with this STB-DVD-VCR.

3 To...

Then press...

 

Stop the playback

(STOP).

 

Eject the cassette

 

 

(EJECT).

 

 

 

 

 

Adjusting Picture Alignment Manually

The Picture Adjustment feature allows you to adjust the alignment manually to obtain the best possible picture.

When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK buttons until the picture is clear and stable.

Result:The tracking bar appears.

The image is adjusted.

The tracking bar disappears when you release the button.

Selecting the Audio Output Mode

You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available.

OptionDescription

LUsed to listen to the sound on the left Hi-Fi channel.

RUsed to listen to the sound on the right Hi-Fi channel.

MIX

Used to listen to the mixed sound of the

 

Hi-Fi and normal channels.

 

 

MONO

Used to listen to the sound on the normal

 

mono channel.

 

 

L R Used to listen to Hi-Fi stereo sound on the left and right channels.

When playing back tapes recorded in Hi-Fi, the sound switches to Hi-Fi after five seconds of Mono.

To select the sound mode, simply press the AUDIO button on the remote control until the required option is displayed.

 

L

 

 

 

R

 

 

 

MIX

 

 

L R

MONO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The selection of audio output is impossible on STB view.

ENG-22

Image 23
Contents SV-DVD54T Remote Control Overview Contents STB Functions DVD Functions Solving ProblemsFollowing illustrations represent precautions Safety InstructionsCharacteristics Disc Type and CharacteristicsRear View of the STB-DVD-VCR AccessoriesFront View of the STB-DVD-VCR Use same types of batteries Display IndicatorsInserting Batteries in the Remote Control DVD Deck is active DVD, CD is loadedSelect the required language by pressing Or ❷ buttons Plug & Auto Set upSwitch on the television Tuning Your Television forSelect Language Setting the Date and Time Setting the Menu LanguageOpen Menu Install option Presetting the Stations AutomaticallyInstall option Presetting the Stations ManuallySame time on the television screen Clearing a Preset StationChanging the Preset Station Table Press the Clear buttonBlack and White Selecting the Colour ModeChannel CH28 .. CH38 .. CH69On completion, press Return three times to exit the menu Intelligent Picture ControlAuto Power Off option is selected Auto Power off Screen MessagesProtecting a Recorded Cassette Selecting the Cassette TypeRepeat Play Hold the REC button down for a while to start recording Recording a Programme ImmediatelyRecording a Programme with Automatic Stop Check that the date and time are correct Using the G-CODE FeatureBefore presetting your STB-DVD-VCR Up to six programmes can be presetIf you wish to Then Modifying G-code ProgrammingIf you have forgotten which programmes will be recorded Using the Timer Programming FeatureChecking a Preset Recording You can check your preset recordingsPlaying a Cassette Cancelling a Preset RecordingAdjusting Picture Alignment Manually Selecting the Audio Output ModeYou can play a cassette in slow motion Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame Playing a Sequence at Variable SpeedsIntro Scan Searching for a Specific SequenceGo To 00000 Stop End SearchTape counter Using the Tape CounterTo cancel an Index search simply press the ❿II or button Index Skip SearchRecording from Another VCR or Camcorder Connecting an RCA Audio/Video Input CableUsing the TV Buttons on the Remote Control With the unit in Stop mode, press the Menu button Choosing a ConnectionDigital Recorded Setting Up the Language FeaturesOK or ❿button Press the ,❷ buttons to select EnglishDynamic Compression Setting Up the Audio OptionsDolby Digital Out MPEG-2 Digital OutNtsc Disc Output Setting Up the Display OptionsTV Aspect Black LevelThere are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password Use ,❷ to select Change PasswordBefore You Begin Receiver Connections Special Playback FeaturesIf you are using a 43 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TVTo make the screen disappear, press the INFO. button again Using the Display FunctionWhen Playing a DVD/CD Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Repeat Play Selecting the Audio Language When playing a DVDUsing the Audio button Clearing a Mark Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD Recalling a Marked SceneReturn to the Album Screen MP3/WMA Play Picture CD PlaybackCD-R MP3/WMA discs Your MP3 or WMA files should be ISO 9660 or Joliet formatSeconds, the menu will disappear CD-R Jpeg DiscsSelect Soundtrack Volume ControlTo control the volume level STB Function Main MenuSubtitle Select VideotrackSelect Favorites Programme InformationUse the ,❷ keys to select a Teletext VBI you want InstallationTeletext VBI To change the Teletext VBIAt the request window This cause your previous settings to be deletedChannel Organising Select a channel list to delete with ,❷ or ❿❿ keys Parental LockTo delete channels from Favorite Group This will take you to the following menu Parental Lock System SetupTo cancel the lock Press the INFO. key again in order to cancel the lockOutput Technical Specifications VCR / DVDGeneral InputRF Input Technical Specifications STBDemodulator Problem Explanation/Solution Troubleshooting Guide VCRProblem Action Troubleshooting Guide DVDBefore requesting service troubleshooting Channel data Or Manual scanning menu Does not exist Troubleshooting Guide STBProblem Possible cause Solution of the problem AK68-00467C