Samsung SV-DVD54T Selecting the Cassette Type, Repeat Play, Protecting a Recorded Cassette

Page 18

Selecting the Cassette Type		Selecting the Recording Speed

If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

1After pressing the MENU press the corresponding ,❷ buttons to select the VCR option.

2Press the OK or ❿ buttons to select this option. Result: The VCR Setup menu is displayed.

3 Press the corresponding					or❷ buttons, until the
Tape Select option is selected.

					VCR Setup			E180
				Tape Select	: E180			E240
				Tape Select	: E180			E240
				Repeat Play	: Off			E260
				VCR Function				E300
				VCR Function				E300

STB

4Press the OK or ❿ buttons as many times as required, until the correct cassette length is displayed.

E180 E240

E 300

E260

5Press RETURN twice to exit the menu.

Repeat Play

You can set repeat play to repeat the tape continuously from beginning to end.

				VCR Setup
		Tape Select	: E180				Off
		Repeat Play	: Off				On
							On

VCR Function

STB

	To...	Press OK or ❿, until...

	Repeat play	On is displayed.
	Do not wish to repeat play	Off is displayed.

You can record a cassette at two different speeds:

◆SP (Standard Play)

◆LP (Long Play)

In Long Play modes:

◆Each cassette lasts twice as long

◆The recording is of a slightly lower quality

To record a cassette...		Press the SPEED button on the
		remote control, until...

In standard play mode		SP is displayed.
In long play mode		LP is displayed.


Type	Recording Time (in SP)

E-180	180 mins. or 3 hours

E-240	240 mins. or 4 hours

E-260	260 mins. or 4 hours and 20 mins.

E-300	300 mins. or 5 hours

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

ENG-17

Image 18

Contents SV-DVD54T Remote Control Overview Contents DVD Functions Solving Problems STB FunctionsSafety Instructions Following illustrations represent precautionsDisc Type and Characteristics CharacteristicsAccessories Front View of the STB-DVD-VCRRear View of the STB-DVD-VCR DVD Deck is active DVD, CD is loaded Display IndicatorsInserting Batteries in the Remote Control Use same types of batteriesPlug & Auto Set up Select the required language by pressing Or ❷ buttonsTuning Your Television for Switch on the televisionSetting the Date and Time Setting the Menu Language Open MenuSelect Language Presetting the Stations Automatically Install optionPresetting the Stations Manually Install optionPress the Clear button Clearing a Preset StationChanging the Preset Station Table Same time on the television screenCH28 .. CH38 .. CH69 Selecting the Colour ModeChannel Black and WhiteIntelligent Picture Control On completion, press Return three times to exit the menuAuto Power off Screen Messages Auto Power Off option is selectedSelecting the Cassette Type Repeat PlayProtecting a Recorded Cassette Recording a Programme Immediately Recording a Programme with Automatic StopHold the REC button down for a while to start recording Up to six programmes can be preset Using the G-CODE FeatureBefore presetting your STB-DVD-VCR Check that the date and time are correctModifying G-code Programming If you wish to ThenYou can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording If you have forgotten which programmes will be recordedSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence at Variable Speeds Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame You can play a cassette in slow motionEnd Search Searching for a Specific SequenceGo To 00000 Stop Intro ScanIndex Skip Search Using the Tape CounterTo cancel an Index search simply press the ❿II or button Tape counterConnecting an RCA Audio/Video Input Cable Recording from Another VCR or CamcorderUsing the TV Buttons on the Remote Control Choosing a Connection DigitalWith the unit in Stop mode, press the Menu button Press the ,❷ buttons to select English Setting Up the Language FeaturesOK or ❿button RecordedMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionBlack Level Setting Up the Display OptionsTV Aspect Ntsc Disc OutputUse ,❷ to select Change Password Setting Up the Parental ControlAbout the Change Password There are up to 8 rating levels on a discReceiver Connections Special Playback Features Before You BeginIf you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVUsing the Display Function When Playing a DVD/CDTo make the screen disappear, press the INFO. button again Using the Angle button Using the Subtitle buttonChanging the Camera Angle When playing a DVD Using the Audio buttonRepeat Play Selecting the Audio Language Recalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD Clearing a MarkYour MP3 or WMA files should be ISO 9660 or Joliet format MP3/WMA Play Picture CD PlaybackCD-R MP3/WMA discs Return to the Album ScreenCD-R Jpeg Discs Seconds, the menu will disappearSTB Function Main Menu Volume ControlTo control the volume level Select SoundtrackProgramme Information Select VideotrackSelect Favorites SubtitleTo change the Teletext VBI InstallationTeletext VBI Use the ,❷ keys to select a Teletext VBI you wantThis cause your previous settings to be deleted Channel OrganisingAt the request window Parental Lock To delete channels from Favorite GroupSelect a channel list to delete with ,❷ or ❿❿ keys Press the INFO. key again in order to cancel the lock Parental Lock System SetupTo cancel the lock This will take you to the following menuInput Technical Specifications VCR / DVDGeneral OutputTechnical Specifications STB DemodulatorRF Input Troubleshooting Guide VCR Problem Explanation/SolutionTroubleshooting Guide DVD Before requesting service troubleshootingProblem Action Troubleshooting Guide STB Problem Possible cause Solution of the problemChannel data Or Manual scanning menu Does not exist AK68-00467C