Samsung SV-DVD54T Using the G-CODE Feature, Before presetting your STB-DVD-VCR, Code

Page 20

Using the G-CODE Feature

Before presetting your STB-DVD-VCR:

◆Switch on both the television and your STB-DVD-

VCR

◆Check that the date and time are correct

◆Insert the cassette on which the programme is to be recorded (safety tab intact)

Up to six programmes can be preset.

1To enter a G-Code, press the TIMER button.

Press the or❷ and OK or ❿ buttons to select

G-Code

Result: A message is displayed to allow you to enter the G-Codecode.

☛If all six programmes have been set, the message Timer is full is displayed. Refer to page 22 if you wish to cancel a preset recording.

Timer Method

Standard

G-Code

G-Code

Code

	Code	: 0 - 9
	Correct	:

2Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine.

➢If you wish to correct the G-Codecode that you are entering:

◆Press the ➛ button until the digit to be corrected is cleared

◆Enter the correct digit

3Press the OK button.

Result: The information concerning the programme is displayed.

☛When using the G-Codefunction for the

first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the

or❷ buttons. Refer to the following page if:

◆The programme number or times flash

◆You wish to modify the programme

4If the programme and times are correct, press the RETURN button.

5Press the STANDBY/ON button to activate the timer.

6Refer to page 21~22 if you wish to:

◆Check that your STB-DVD-VCR has been programmed correctly

◆Cancel a preset recording

☛The numbers next to each TV programme listing are G-Code code numbers, which allow you to programme your STB-DVD-VCR instantly with the remote control. Tap in the G-Code code for the programme you wish to record.

™G-Code is a trademark of Gemstar Development Corporation. The G-Code system is manufactured under licence from Gemstar Development Corporation.

ENG-19

Image 20

Contents SV-DVD54T Remote Control Overview Contents DVD Functions Solving Problems STB FunctionsSafety Instructions Following illustrations represent precautionsDisc Type and Characteristics CharacteristicsRear View of the STB-DVD-VCR AccessoriesFront View of the STB-DVD-VCR Display Indicators Inserting Batteries in the Remote ControlDVD Deck is active DVD, CD is loaded Use same types of batteriesPlug & Auto Set up Select the required language by pressing Or ❷ buttonsTuning Your Television for Switch on the televisionSelect Language Setting the Date and Time Setting the Menu LanguageOpen Menu Presetting the Stations Automatically Install optionPresetting the Stations Manually Install optionClearing a Preset Station Changing the Preset Station TablePress the Clear button Same time on the television screenSelecting the Colour Mode ChannelCH28 .. CH38 .. CH69 Black and WhiteIntelligent Picture Control On completion, press Return three times to exit the menuAuto Power off Screen Messages Auto Power Off option is selectedProtecting a Recorded Cassette Selecting the Cassette TypeRepeat Play Hold the REC button down for a while to start recording Recording a Programme ImmediatelyRecording a Programme with Automatic Stop Using the G-CODE Feature Before presetting your STB-DVD-VCRUp to six programmes can be preset Check that the date and time are correctModifying G-code Programming If you wish to ThenUsing the Timer Programming Feature Checking a Preset RecordingYou can check your preset recordings If you have forgotten which programmes will be recordedCancelling a Preset Recording Adjusting Picture Alignment ManuallySelecting the Audio Output Mode Playing a CassettePlaying a Cassette in Slow Motion Playing a Sequence Frame by FramePlaying a Sequence at Variable Speeds You can play a cassette in slow motionSearching for a Specific Sequence Go To 00000 StopEnd Search Intro ScanUsing the Tape Counter To cancel an Index search simply press the ❿II or buttonIndex Skip Search Tape counterConnecting an RCA Audio/Video Input Cable Recording from Another VCR or CamcorderUsing the TV Buttons on the Remote Control With the unit in Stop mode, press the Menu button Choosing a ConnectionDigital Setting Up the Language Features OK or ❿buttonPress the ,❷ buttons to select English RecordedSetting Up the Audio Options Dolby Digital OutMPEG-2 Digital Out Dynamic CompressionSetting Up the Display Options TV AspectBlack Level Ntsc Disc OutputSetting Up the Parental Control About the Change PasswordUse ,❷ to select Change Password There are up to 8 rating levels on a discReceiver Connections Special Playback Features Before You BeginAdjusting the Aspect Ratio EZ View To play back using aspect ratio DVDIf you are using a 169 TV If you are using a 43 TVTo make the screen disappear, press the INFO. button again Using the Display FunctionWhen Playing a DVD/CD Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Repeat Play Selecting the Audio Language When playing a DVDUsing the Audio button Using the Mark Function MP3/WMA Play Using the Mark Function DVDRecalling a Marked Scene Clearing a MarkMP3/WMA Play Picture CD Playback CD-R MP3/WMA discsYour MP3 or WMA files should be ISO 9660 or Joliet format Return to the Album ScreenCD-R Jpeg Discs Seconds, the menu will disappearVolume Control To control the volume levelSTB Function Main Menu Select SoundtrackSelect Videotrack Select FavoritesProgramme Information SubtitleInstallation Teletext VBITo change the Teletext VBI Use the ,❷ keys to select a Teletext VBI you wantAt the request window This cause your previous settings to be deletedChannel Organising Select a channel list to delete with ,❷ or ❿❿ keys Parental LockTo delete channels from Favorite Group Parental Lock System Setup To cancel the lockPress the INFO. key again in order to cancel the lock This will take you to the following menuTechnical Specifications VCR / DVD GeneralInput OutputRF Input Technical Specifications STBDemodulator Troubleshooting Guide VCR Problem Explanation/SolutionProblem Action Troubleshooting Guide DVDBefore requesting service troubleshooting Channel data Or Manual scanning menu Does not exist Troubleshooting Guide STBProblem Possible cause Solution of the problem AK68-00467C