Samsung DVD-HD950 Controlling a TV with the Remote control, Troubleshooting, TV Codes, ENG-70

Chapter 6

R E F E R E N C E

Controlling a TV with the Remote control

The remote control can also be set up to control most TVs. To program the remote control, use the code that corresponds to your brand.

TV Codes

BRAND	CODE	BRAND	CODE
ANAM	10, 11, 12, 13, 14, 15, 16, 17, 18	NORDMENDE	72, 73
AIWA	82	NOKIA	74
BANG&OLUFSEN	57	PANASONIC	53, 54, 74, 75
BLAUPUNKT	71	PHILIPS	06, 55, 56, 57
BRANDT	73	PHONOLA	06, 56, 57
BRIONVEGA	57	PIONEER	58, 59, 73, 74, 75
CGE	52	RADIOLA	06, 56
CONTINENTAL EDISON	75	RADIOMARELLI	57
DAEWOO	19, 20, 23, 24, 25, 26, 27, 28, 29,	RCA	45, 46
	30 , 31, 32, 33, 34	REX	74
EMERSON	64	SABA	57, 72, 73, 74, 75
FERGUSON	73	SALORA	74
FINLUX	06, 49, 57	SAMSUNG	01, 02, 03, 04, 05, 06, 07, 08, 09
FORMENTI	57	SANYO	41, 42, 43, 44, 48
FUJITSU	84	SCHNEIDER	06
GRADIENTE	70	SELECO	74
GRUNDIG	49, 52, 71	SHARP	36, 37, 38, 39, 48
HITACHI	60, 72, 73, 75	SIEMENS	71
IMPERIAL	52	SINGER	57
JVC	61, 79	SINUDYNE	57
LG	06, 19, 20, 21, 22, 78	SONY	35, 48
LOEWE	06, 69	TELEAVA	73
LOEWE OPTA	06, 57	TELEFUNKEN	67, 73, 75, 76
MAGNAVOX	40	THOMSON	72, 73, 75
METZ	57	THOMSON ASIA	80, 81
MITSUBISHI	06, 48, 62, 65	TOSHIBA	47, 48, 49, 50, 51, 52
MIVAR	52, 77	WEGA	57
NEC	83	YOKO	06
NEWSAN	68	ZENITH	63
NOBLEX	66

1.Turn on the TV.

2.Point the DVD’s remote control at the TV.

3.While holding the TV POWER button down, enter the code for your brand.

4.If the TV turns off, setup is complete. Enter other codes of the same brand if the first code does not work.

You can control the TV POWER, CH ( , ), VOL (+, -) and TV/VIDEO functions of another manufacturer's TV.

-The remote control may not be able to control every model TV of the brands listed.

-If you replace the remote control's batteries, set the brand code again.

e.g) For Samsung TVs

While holding down the TV POWER button, enter 0 and then 1.

R E F E R E N C E

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Problem		Action	Page
No operations can be	•	Check the batteries in the remote control.
performed with the		They may need replacing.
remote control.	•	Operate the remote control at a distance of no more than 20 feet.
	•	Remove batteries and hold down one or more buttons for several minutes to	P5
		drain the microprocessor inside the remote control to reset it. Reinstall
		batteries and try to operate the remote control again.
Disc does not play.	•	Ensure that the disc is installed with the label side facing up.	P8
	•	Check the region number of the DVD.

5.1channel sound is • 5.1 channel sound is reproduced only when the following conditions are met. :

not being reproduced.			1) The DVD player is connected with the proper Amplifier		P21
			2) The disc is recorded with 5.1 channel sound.
		•	Check whether the disc being played has the “5.1 ch” mark on the outside.
		•	Check if your audio system is connected and working properly.		P60~61
		• In a SETUP Menu, is the Audio Output set to Bitstream?
The	icon appears	•	The features or action cannot be completed at this time because:
on screen.		1. The DVD’s software restricts it.
		2. The DVD’s software doesn’t support the feature (e.g., angles).
		3. The feature is not available at the moment.
		4. You’ve requested a title or chapter number or search time that is out of range.
Disc Menu doesn’t appear.		•	Check if the disc has a Menu.
Play mode differs from		•	Some of the functions selected in the Setup Menu may not work properly if the		P53~69
the Setup Menu			disc is not encoded with the corresponding function.
selection.
The screen ratio		•	The Screen Ratio is fixed on your DVDs.		P64~65
cannot be changed.
No audio.		•	Make sure you have selected the correct Digital Output in the Audio Options		P60~61
			Menu.
The screen is blocked		•	Press the	button for more than 5 seconds with no disc inside and the tray	P23
			closed. All settings will revert to the factory settings.
Forgot password		•	Press the	button for more than 5 seconds with no disc inside and the tray
			closed. All settings including the password will revert to the factory settings.		P67~69
			Don't use this unless absolutely necessary.
If you experience other		•	Go to the contents and find the section of the instruction book that contains
problems.			the explanations regarding the current problem, and follow the procedure once
			again.
		•	If the problem still cannot be solved, please contact your nearest Samsung
			authorized service center or call 1-800-SAMSUNG.
The picture is noisy or		•	Make sure that the disc is not dirty or scratched.		P4
distorted		•	Clean the disc.

Reference

ENG-70 ENG-71