Samsung ST54T6 ST62T6 manual Cable with a Cable box that Descrambles All Channels

Page 15

I N S T A L L AT I O N

Cable with a Cable box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply, “OUT”.

2

Connect the other end of this cable to the ANT IN terminal on the rear of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN ter- minal on your cable box.

2

Connect this cable to a two-way splitter.

▼	This terminal might be labeled

“ANT IN,” “VHF IN,” or simply, “IN.”

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

CHAPTER TWO: INSTALLATION 2.3

Image 15

Contents Owner’s Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Safety Installation Your New TVOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Front Panel Jacks Audio Input jacks´ Video Input jack ¨ S-VIDEO Input jack Video Input jacks Rear Panel JacksAntenna terminals ¨ Audio Input jacks ´ AUDIO-VIDEO Monitor Output jacksCable Remote ControlPower ´ TVConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsPlug the adaptor into the ANT in terminal on the rear panel Cable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels Cable with a Cable box that Descrambles All ChannelsConnect this cable to a two-way splitter Install AT I O N Connecting a VCR Connecting a Second VCR to Record from the TV Connecting a CamcorderConnecting to Y, PB, PR Connecting a DVD Player480iInstall two AA size batteries Replace the cover Installing Batteries in the Remote ControlPlug & Play Feature Press the Power buttonTurning the TV On and Off If you want to reset this feature Using the Perfect Focus Feature Press the Menu buttonPress Menu button to exit Adjusting Manual Convergence Adjust Red Convergence Viewing the Display Press the Display button on the remote controlViewing the Menus and On-Screen Displays Viewing the MenusSelecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceAdding and Erasing Channels Manual Method Storing Channels in Memory Automatic MethodChanging Channels Using the Channel ButtonsUsing the Number Buttons Using the Previous ChannelPress the Left or Right button to select the first channel Selecting Your Favorite ChannelsTo Store Your Favorite Channels To View Your Favorite ChannelsPress the Menu button to exit the menu Z, blank, 0,1,...9 Labeling the ChannelsCustomizing the Picture Picture ControlUsing Automatic Picture Settings Adjusting the Volume Using MuteSound Control Press the Menu button exit Customizing the SoundUsing Automatic Sound Settings Press the Down button to select Time menu Setting the ClockViewing an External Signal Source Fine Tuning Channels Press the Left or Right button to adjust the fine tuningStar icon*will appear Digital Noise Reduction LNA Low Noise Amplifier Changing the Color Tone Using the R.surf Feature Setting the On/Off Timer Setting the Sleep Timer When finished, press Enter buttonPress the Sleep button on the remote control Surround Extra sound settings Surround, Auto Volume, MelodyChoosing a Multi-Channel Sound MTS Track Viewing Closed Captions Activating Picture-in-Picture Viewing Picture-in-PictureSelecting a Signal Source Antenna or Cable for PIP Selecting a Signal Source External A/V for PIPPress the Down button to select ANT/CATV Changing the Size of the PIP Window Swapping the Contents of the PIP Image and Main ImageChanging the Location Rotating in PIP mode Changing the PIP ChannelScanning the Available Channels Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDTurn off your VCR or Setting Up Your Remote Control to Operate Your Cable Box DVD Codes VCR CodesCable Box CodesChapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications