Samsung ST54T6 ST62T6 manual Chapter Five, Identifying Problems

Page 58

Chapter Five

T R O U B L E S H O O T I N G

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center.

Identifying Problems

Problem	Possible Solution

Poor picture.	Try another channel.
	Adjust the antenna.
	Check all wire connections.

Poor sound quality.	Try another channel.
	Adjust the antenna.

No picture or sound.	Try another channel.
	Press the TV/Video button.
	Make sure the TV is plugged in.
	Check the antenna connections.

No color, wrong colors or tints.	Make sure the program is broadcast in color.
	Adjust the picture settings.

Picture rolls vertically.	Adjust the antenna.
	Check all wire connections.

The TV operates erratically.	Unplug the TV for 30 seconds, then try
	operating it again.

Your remote control does not	Press the “MODE” button to put your remote
operate your TV.	control in the “TV” mode.

The TV won’t turn on.	Make sure the wall outlet is working.

5.1 CHAPTER FIVE: TROUBLESHOOTING

Image 58

Contents Owner’s Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Safety Your New TV InstallationOperation Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV Audio Input jacks Front Panel Jacks´ Video Input jack ¨ S-VIDEO Input jack ´ AUDIO-VIDEO Monitor Output jacks Rear Panel JacksAntenna terminals ¨ Audio Input jacks Video Input jacks´ TV Remote ControlPower CableAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasPlug the adaptor into the ANT in terminal on the rear panel Separate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxCable with a Cable box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter Install AT I O N Connecting a VCR Connecting a Camcorder Connecting a Second VCR to Record from the TVConnecting a DVD Player480i Connecting to Y, PB, PRInstalling Batteries in the Remote Control Install two AA size batteries Replace the coverPress the Power button Plug & Play FeatureTurning the TV On and Off If you want to reset this feature Press the Menu button Using the Perfect Focus FeaturePress Menu button to exit Adjusting Manual Convergence Adjust Red Convergence Viewing the Menus Press the Display button on the remote controlViewing the Menus and On-Screen Displays Viewing the DisplaySelecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual MethodUsing the Previous Channel Using the Channel ButtonsUsing the Number Buttons Changing ChannelsTo View Your Favorite Channels Selecting Your Favorite ChannelsTo Store Your Favorite Channels Press the Left or Right button to select the first channelPress the Menu button to exit the menu Labeling the Channels Z, blank, 0,1,...9Picture Control Customizing the PictureUsing Automatic Picture Settings Using Mute Adjusting the VolumeSound Control Customizing the Sound Press the Menu button exitUsing Automatic Sound Settings Setting the Clock Press the Down button to select Time menuViewing an External Signal Source Press the Left or Right button to adjust the fine tuning Fine Tuning ChannelsStar icon*will appear Digital Noise Reduction LNA Low Noise Amplifier Changing the Color Tone Using the R.surf Feature Setting the On/Off Timer When finished, press Enter button Setting the Sleep TimerPress the Sleep button on the remote control Extra sound settings Surround, Auto Volume, Melody SurroundChoosing a Multi-Channel Sound MTS Track Viewing Closed Captions Viewing Picture-in-Picture Activating Picture-in-PictureSelecting a Signal Source External A/V for PIP Selecting a Signal Source Antenna or Cable for PIPPress the Down button to select ANT/CATV Swapping the Contents of the PIP Image and Main Image Changing the Size of the PIP WindowChanging the PIP Channel Changing the Location Rotating in PIP modeScanning the Available Channels Setting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote Control Turn off your VCR or Setting Up Your Remote Control to Operate Your Cable Box Codes VCR CodesCable Box DVD CodesIdentifying Problems Chapter FiveUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications