Samsung ST54T6 ST62T6 manual Connecting a VCR

Page 17

I N S T A L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

2

Connect a set of audio cables between the

AUDIO OUT jacks on the VCR and the

AUDIO jacks on the TV.

If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable.

3

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

If you have a S-VHS VCR, use the S-Video connections and remove the video cable. Do not connect the video cable and the S- Video cable to video 1 simultaneously.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

CHAPTER TWO: INSTALLATION 2.5

Image 17

Contents Owner’s Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Safety Operation InstallationYour New TV Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV ´ Video Input jack ¨ S-VIDEO Input jack Front Panel JacksAudio Input jacks Antenna terminals ¨ Audio Input jacks Rear Panel Jacks´ AUDIO-VIDEO Monitor Output jacks Video Input jacksPower Remote Control´ TV CablePlug the adaptor into the ANT in terminal on the rear panel Connecting VHF and UHF AntennasAntennas with 300-ohm Flat Twin Leads Antennas with 75-ohm Round Leads Connecting Cable TV Separate VHF and UHF Antennas Cable without a Cable BoxConnect this cable to a two-way splitter Connecting to a Cable Box that Descrambles Some ChannelsCable with a Cable box that Descrambles All Channels Install AT I O N Connecting a VCR Connecting a Second VCR to Record from the TV Connecting a CamcorderConnecting to Y, PB, PR Connecting a DVD Player480iInstall two AA size batteries Replace the cover Installing Batteries in the Remote ControlTurning the TV On and Off Plug & Play FeaturePress the Power button If you want to reset this feature Press Menu button to exit Using the Perfect Focus FeaturePress the Menu button Adjusting Manual Convergence Adjust Red Convergence Viewing the Menus and On-Screen Displays Press the Display button on the remote controlViewing the Menus Viewing the DisplaySelecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceAdding and Erasing Channels Manual Method Storing Channels in Memory Automatic MethodUsing the Number Buttons Using the Channel ButtonsUsing the Previous Channel Changing ChannelsTo Store Your Favorite Channels Selecting Your Favorite ChannelsTo View Your Favorite Channels Press the Left or Right button to select the first channelPress the Menu button to exit the menu Z, blank, 0,1,...9 Labeling the ChannelsCustomizing the Picture Picture ControlUsing Automatic Picture Settings Sound Control Adjusting the VolumeUsing Mute Press the Menu button exit Customizing the SoundUsing Automatic Sound Settings Press the Down button to select Time menu Setting the ClockViewing an External Signal Source Star icon*will appear Fine Tuning ChannelsPress the Left or Right button to adjust the fine tuning Digital Noise Reduction LNA Low Noise Amplifier Changing the Color Tone Using the R.surf Feature Setting the On/Off Timer Press the Sleep button on the remote control Setting the Sleep TimerWhen finished, press Enter button Surround Extra sound settings Surround, Auto Volume, MelodyChoosing a Multi-Channel Sound MTS Track Viewing Closed Captions Activating Picture-in-Picture Viewing Picture-in-PicturePress the Down button to select ANT/CATV Selecting a Signal Source Antenna or Cable for PIPSelecting a Signal Source External A/V for PIP Changing the Size of the PIP Window Swapping the Contents of the PIP Image and Main ImageScanning the Available Channels Changing the Location Rotating in PIP modeChanging the PIP Channel Turn off your VCR or Customizing Your Remote ControlSetting Up Your Remote Control to Operate Your VCR or DVD Setting Up Your Remote Control to Operate Your Cable Box Cable Box VCR CodesCodes DVD CodesChapter Five Identifying ProblemsSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country