Samsung ST-54T6, ST-62T6 manual Connecting a VCR

Page 16

I N S TA L L AT I O N

4

Connect a coaxial cable
between the ANTENNA
OUT terminal on the	Incoming
cable box and the B–IN	Cable
terminal on the A/B	Splitter
terminal on the A/B
switch.

IN CABLE OUT

Cable Box

A

B

RF (A/B)

Switch

	5
	Connect another cable
	between the other OUT
	terminal on the splitter	IN CABLE OUT
	and the A–IN terminal	Incoming
	and the A–IN terminal	Cable
	on the RF (A/B) switch.	Splitter
	on the RF (A/B) switch.	Cable Box
		Cable Box

A

B

RF (A/B)

Switch

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.

Incoming

Cable

Splitter

		A
IN	CABLE OUT	B
IN	CABLE OUT

	RF (A/B)
Cable Box	Switch

75

VHF/UHF

TV Rear

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usu- ally channel 3 or 4.)

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

VCR Rear Panel

	IN	AUDIO	VIDEO
		OUT	OUT

Incoming	ANTENNA L R
	OUT

Cable or

Antenna

2.4 CHAPTER TWO: INSTALLATION

Image 16

Contents Owner’s Instructions Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Your New TV InstallationOperation Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV Front Panel Jacks Audio in jacks´ Video in jack Super Video Input jackSuper Video Input Rear Panel JacksAudio Inputs Remote Control PIPNumber buttons +100Remote Control ¸ VCR controls PIP Controls Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter Connecting a VCR Connecting an S-VHS VCR Antenna or cable to your VCR and your TVConnecting a Second VCR to Record from the TV Connecting a Camcorder Installing Batteries in the Remote Control Adjusting Basic Convergence Press PowerTurning the TV On and Off Press VOL +Adjust Blue Convergence Adjust Red ConvergenceIf a horizontal red line is Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Press Menu to display the menuSelecting the Video Signal-source Memorizing the ChannelsPress MENU, then press CH twice to highlight SET UP Storing Channels in Memory Automatic MethodPress VOL + again TV will beginUsing the Channel Buttons Directly Accessing ChannelsChanging Channels Adding and Erasing Channels Manual MethodPress the CH or CH button to select the correct minutes Setting the ClockPress Menu three times to exit Using Mute Adjusting the VolumePress VOL + or VOL to increase or decrease the volume Customizing the Picture Video icon will be highlighted starts blink- ingUsing Automatic Picture Settings Alternate methodCustomizing the Sound Using Automatic Sound Settings Viewing a VCR or Camcorder Tape Video1 Video2 Video3Press TV/VIDEO to exit Select Video jack Audio jackSetting Up Your Remote Control to Operate Your VCR Customizing Your Remote ControlTurn off your VCR Setting Up Your Remote Control to Operate Your Cable Box VCR CodesDVD Codes Turn off your cable boxCable Box Codes NSCSetting the On/Off Timer Press CH twice to highlight Time Press VOL +Press CH to select On time Press CH or CH to select the appropriate minutesSetting the Sleep Timer Press VOL+ Viewing Closed CaptionsPress VOL+ to open the Caption menu Fine Tuning Channels Select the appropriate channel Press MenuLNA Low Noise Amplifier Press CH twice to highlight LNAChoosing a Multi-Channel Sound MTS Soundtrack Special Audio Options MTS and HeadphonesPress CH to highlight MTS Setting up Wireless Headphones with Picture-in-Picture Using Wireless HeadphonesTurn the transmitter and Wireless Headphones on Viewing Picture-in-Picture Activating Picture-in-PicturePress VOL + to select the PIP menu Press VOL + to select PIP OnSelecting a Signal Source External A/V for PIP Selecting a Signal Source Antenna or Cable for PIPSwapping the Contents of the PIP image and Main image Changing the PIP Channel Changing the Location Rotating the PIP WindowFreezing the PIP Image Changing the Size of the PIP WindowUsing the V-Chip Setting Up Your Personal ID Number PINHow to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-ChipPress CH six times to highlight the V-chip menu Press VOL+ TV-Y Young children TV-Y7 Children 7 and over General audienceParental guidance TV-14SET UP Mpaa Rating Identifying Problems Chapter FiveUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications