connecting & setting up
COnnECTing DVD rECOrDEr & VCr TO THE TV USing THE rF CaBLE
M ` Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.
1.Remove the aerial or network input cable from the television.
. Connect this cable to the 75Ω aerial jack marked on the rear of your DVD Recorder & VCR. . Plug the RF Cable supplied into the jack on your DVD Recorder & VCR.
. Plug the other end of the RF Cable into the connector previously used for the aerial on the television.
M ` The RF cable connection of this product sends only signal of TV.
`You must connect Audio/Video cables to watch a DVD and Video tape from your DVD Recorder & VCR.
To rF in
To rF OUT
To anT inPUT
0_ connecting & setting up