recording
❖Recording Mode (DVD)
AUTO : Select when you want to set video quality automatically. In AUTO mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function is selected only one mode in HQ, HSP, SP, LSP, ESP, LP, EP and SLP modes and you can use this mode for timer recording.
HQ : Approx. 1 hour
HSP : Approx. 1 hour 30 minutes
SP (standard quality) : Approx. 2 hours
LSP : Approx. 2 hours 30 minutes
ESP : Approx. 3 hour
LP : Approx. 4 hour
EP (extended mode) : Approx. 6 hour
SLP (long duration mode) : Approx. 8 hours
The dual layer DVD±Rs have approximately double the capacity of single layer DVD±Rs.
❖Recording Mode (VCR)
AUTO : Select when you want to set video quality automatically.
It depends on remaining time on the VCR tape.
SP : Standard Play, for best picture quality.
LP : Long Play, for maximum recording time (2 times SP).
.Press the OK button.
If the timer settings overlap
The first programme has priority.
After recording of the first programme is complete, the second programme starts being recorded.
.Turn the power off to finish the Timer Recording setting.
~
will blink if disc or tape is not inserted.
~
will appear on the front panel. It means that a timer recording is registered.
Timer Recording will not work when the power is on.
M | ` The timer recording time may differ from the set time depending on disc status and overall timer recording status |
| (for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start |
| time of the next recording.) |