recording
Basic VCR Recording
Before starting
1.Check TV channel and Antenna connections.
2.Check the remaining time on the tape.
You can record a TV show in progress by inserting a blank tape and pressing the (REC) button. You can even add time in preset increments up to 6 hours by pressing the (REC) button repeatedly.
M ` | Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece |
| of tape. |
J ` | Warning : Do not cover this opening unless you are sure you want to record over the tape. |
1.Insert a blank VHS tape into the VCR deck.
~Make sure the tape is long enough to record the entire programme.
. Press the Number buttons or the PROG/TRK (,/.) buttons to select the desired channel. Press the INPUT SEL. button to select Prog.1, AV1, AV2 or DV input
if recording from an external device connected to the input jacks of the recorder.
. Press the REC SPEED button on the remote control to set the Record Speed to one of the following options:
~SP – Standard Play, for best picture quality.
~LP – Long Play, for maximum recording time (2 times SP).
M ` | The selected Record Speed will appear on the front panel display and | ||
Maximum Recording Time - SP vs. LP |
| ||
|
|
|
|
| Tape Length | SP (Standard Play) | Recording Times Data Rates |
|
|
|
|
| E180 | Approx. 3 hrs | Approx. 6 hrs |
|
|
|
|
| E240 | Approx. 4 hrs | Approx. 8 hrs |
|
|
|
|
| E260 | Approx. 4 hrs 40 mins | Approx. 9 hrs 20 mins |
|
|
|
|
| E300 | Approx. 5 hrs | Approx. 10 hrs |
|
|
|
|
M ` | When you watch or record on the VCR during DVD Recording, some function buttons may not operate. |
. Press the (REC) button on the remote control or front panel.
For options while recording is in progress, see “Special Recording Features”.