system setup
Resolution (HDMI) (DVD-VR375 only)
This setting is used when the unit is connected by HDMI or DVI to Display devices (TV, Monitor, etc).
~576p : 720 x 576
~720p : 1280 x 720
~1080i : 1920 x 1080i
~1080p : 1920 x 1080p
~Auto : It will be set to the possible maximum resolution supported by the TV.
~Connect the
576p 720p 1080i 1080p
Video |
|
| 12:00 | |
Title List | TV Type | : 16:9 |
| |
|
| ✔ |
| |
Timer | Resolution(HDMI) | : AutoAuto |
| |
Video(HDMI) | : YCbCr1920 x 1080p | |||
| ||||
Edit | Picture Control | : Standard1920 x 1080i | ||
Dubbing | Component Out | : On1280 x 720p |
| |
Progressive | : Off720 x 576p |
| ||
Disc |
| |||
Setting |
|
|
| |
Setup |
|
|
| |
> Move | sOk | rReturn | eExit |
-If the DVD Recorder is connected to your TV with Component cables (no HDMI/DVI cable connected), the output resolution mode toggles between 576p/576i.
-You can also watch VCR output through HDMI (Video is upscaled to a maximum 1080p).
Video (HDMI) (DVD-VR375 only)
Selects the type of output from the HDMI/OUT jack.
~YCbCr : Normally, select this when connecting to an HDMI device.
~RGB : Gives brighter colours and deeper black.
Select this if colours are weak.
Video |
|
| 12:00 |
Title List | TV Type | : 16:9 |
|
Timer | Resolution(HDMI) | : Auto |
|
Video(HDMI) | : YCb✔ CrbCr |
| |
|
| ||
Edit | Picture Control | : StandardRGB |
|
Dubbing | Component Out | : On |
|
Progressive | : On |
| |
Disc |
| ||
|
|
| |
Setting |
|
|
|
Setup |
|
|
|
> Move | sOk | rReturn | eExit |
Picture Control
Selects the picture control for the video signals output from the AV output jacks. You can adjust the DVD video signal from the recorder to obtain the picture quality you want.
Select the setting that best suits the programme you are watching.
~This function can only be used when you have the Video Out(AV out) jacks connected and does not work with Component and HDMI.
~Dynamic 1 : Produces a bold dynamic picture by increasing the picture contrast and the colour.
Video |
|
| 12:00 |
Title List | TV Type | : 4:3Dynamic1Letter Box |
|
Timer | Picture Control | : StandardDynamic2 |
|
Component Out | : On✔ Standard |
| |
|
| ||
Edit | Progressive | : OffCinema1 |
|
Dubbing |
| Cinema2 |
|
| Personal |
| |
Disc |
|
| |
|
|
| |
Setting |
|
|
|
Setup |
|
|
|
> Move | sOk | rReturn | eExit |
~Dynamic 2 : Produces a more dynamic picture than “Dynamic 1” by further increasing the picture contrast and the colour.
~Standard : Displays a standard picture (function turned off ).
~Cinema 1 : White colours become brighter and black colours become richer,and the colour contrast is increased.
~Cinema 2 : Enhances detail in dark areas by increasing the black level.
~Personal : Adjusts Contrast, Brightness, Colour and Hue using ▲▼◄► buttons.
32_ system setup