Variable Search System
Each time you record a cassette on this DVD Recorder & VCR, an index is automatically marked on the tape when recording is started.The Search function allows you to
~This DVD Recorder & VCR uses a standard indexing system (VISS).
As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.
Go to Zero
Use this feature when you want to search for the 0:00:00 counter position on a cassette.
1.Press the CANCEL button at the point on the tape where you want to set the counter to 0:00:00.
. While the cassette is stopped, press the ANYKEY button.
. Press the ▲▼ buttons to select Go to Zero, then press the OK button.
The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position.
Go to Zero
End search Forward Intro Scan Reverse Intro Scan
>Move sOk
A● ACKPL YB
End search
Use this feature when you want to search for a blank position to record a programme on a cassette.
1.While a cassette is stopped, press the ANYKEY button.
. Press the ▲▼ buttons to select End search, then press the OK button.
The VCR will fast forward, searching for a blank position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end search, the tape will be ejected.
Go to Zero
End search
Forward Intro Scan Reverse Intro Scan
>Move sOk
Forward/Reverse Intro Scan
Use scan and play when you don’t know exactly where a programme is located on a cassette tape.
1.While a cassette is stopped, press the ANYKEY button.
. Press the ▲▼ buttons to select Forward Intro Scan or Reverse Intro Scan, then press the OK button. When an Index mark is found the DVD Recorder & VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
Go to Zero
End search
Forward Intro Scan
Reverse Intro Scan
>Move sOk
English _55