NSettings can be adjusted and stored for each external device you have connected to an input of the TV. In PC Mode, only 16:9 and 4:3 mode can be adjusted.
NSettings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
ATV, Video, Component (480i, 480p)
Component (720p)
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
PC
Digital NR
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
•Off: Turns the Digital NR function off.
•Low: Sets Digital NR to low.
•Medium: Sets Digital NR to medium.
•High: Sets Digital NR to high.
•Auto: Sets Digital NR to Auto.
HDMI Black Level
You can directly select the black level on the screen to adjust the screen depth.
•Normal: The screen gets brighter.
•Low: The screen gets darker.
NThis function is active only when an external device is connected to the TV via HDMI. HDMI Black Level function may not be compatible with all external devices.
Film Mode
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
•Off: Basic video image processing applied and No
Picture Size
16:9, Zoom1, Zoom2, 4:3
16:9, Wide Fit, 4:3
16:9, 4:3, Wide Fit, Screen Fit
16:9, 4:3
| Tint (G/R) | : G50/R50 | |
Picture | Advanced Settings |
| |
Picture Options | ► | ||
| |||
| Picture Reset |
|
Picture Options
| Color Tone | : Normal |
|
|
| Size | : 16:9 |
|
|
| Digital NR | : Auto | ► |
|
| HDMI Black Level | : Normal |
|
|
| Film Mode | : Off |
|
|
| Screen Burn Protection |
|
|
|
|
|
|
|
|
| Move | Enter | Return | |
•Auto: Automatically adjusts for the best image quality between film and video programs.
•Cinema Smooth: Cinema Smooth reproduces film cinema video with greatly reduced or without visible motion judder, as you
see it in the movie theater. (PN50B560T5F/PN58B560T5F/PN63B590T5F only)
NOnly if HDMI 1080p 24Hz signal is input, Cinema Smooth function is activated and you can set ON/OFF. N Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).
Screen Burn Protection |
| Screen Burn Protection |
| |
Configures the Screen Burn Protection options to prevent and reduce pixel burn. |
| Pixel Shift |
| ► |
When an image remains in one position too long, it may cause a permanent burn on the |
|
|
|
|
| Scrolling |
|
| |
screen. |
| Side Gray | : Dark |
|
Preventing Screen |
| Move | Enter | Return |
|
|
|
| |
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes.
•Pixel Shift : Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after- images on the screen.
NOptimum condition for pixel shift;
| Item | TV/AV/Component/HDMI/PC |
|
|
|
Horizontal | 0~4 | 4 |
|
|
|
Vertical | 0~4 | 4 |
|
|
|
Time(min) | 1~4min. | 2 min |
|
|
|
•Side Gray : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.
-Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
-Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
English - 25