Universal Remote Control SL-8000 manual Auto Search Method

Page 11

Using Your Remote

Auto Search Method

Please use this method if none of the Set-Up Code numbers worked for your device during the standard set-up proce- dure or if the manufacturer or brand for your device is not listed in Set-Up Code Tables.

1 Turn on the device you would like the remote control to operate, either manually or with your original remote control.

2 Press the corresponding Device Button (TV, VCR, SAT, CBL, AUD, CD, DVD, or AUX) and the MUTE button, simultaneously. SET will appear in the LCD.

 

AUD

CD

DVD

AUX

Device Buttons

 

 

 

 

 

 

SAT

TV

VCR

CBL

 

 

POWER

 

 

 

Channel Buttons

 

 

 

VOL

CH

Mute Button

 

 

 

MUTE

T/ V

 

 

 

Note: SET appears in the LCD for 20 seconds to indicate that the remote control is ready to be programmed. The following steps must be entered while SET appears in the LCD.

3 Point the remote control toward the device and press the CHANNEL UP button on the remote control. Each but- ton press sends the signal for one Set-Up Code number. Keeping the CHANNEL UP button pressed produces a quick scanning of the Set-Up Code numbers.

Release the CHANNEL UP button as soon as the device turns off. Please confirm that you have the correct code by pressing the MUTE button on the remote. You should be able to turn your device on and off with this button.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SL-8000 Operating Manual Home Theater MasterTable of Contents Introduction Low Battery Message Battery InstallationATo Open and Close the Battery Compartment Cover Function Table Reference Using Your RemoteButton Name Audio Functions SAT Functions TV Functions Function TableNo. Button Name Button Name Three Digit Code Method Preprogrammed Set UpUsing Your Remote Auto Search Method Using Your Remote Set-Up Code Numbers Audio Cable Recalling the Set-Up Code NumberOperation Joining to Device Buttons Setting UpDevice Buttons AAssignment of Audio/Video Equipment AppendixSet-Up Code Number GlossaryAutomatic Audio Mode Main Device ModeTo Set-Up Advanced FeaturesVolume Control Punch Through Punch ThroughsLCD Specifications WarrantyChannel Control Punch Through To Return to the Original SettingAdvanced Features Advanced Features Programming a Second TV, VCR, etc. to Other Device Buttons LCD Displays in the Automatic Audio ModeTransport Control Punch Through To Return to the Original Setting Choice of LCD Displays Changing the LCD DisplayErasing Memory Buttons Memory Buttons Macro Commands Example Memory Button Programming Programming Memory ButtonsBacklighting AUX Set-Up Code TablesCable Set-Up Code Tables VCR Manufacturer/Brand Akai Sampo KEC Admiral Satellite Alphastar Audio Jeff Rowland California Audio Mitsumi Set-Up Code Tables DVD Soundstream OEE-0031V Rev
Top Page Image Contents